Also, what happened to that experimental reactor? Didn't Obama send it to Norway or something?
The second problem was with tellerium penetrating the Hastalloy and weakening it at the grain boundaries. This isn't a problem with stainless steel.
The stainless steel planned is SS316 which is available from multiple sources.
The primary loop does not have insulation surrounding it but it does have a 1m thick graphite reflector to bounce most of the neutrons back to the core then a layer of B4C to absorb the rest before they get to the vessel.
The MSRE was shutdown decades ago and recently had its fuel salt removed. The vessel and piping are still in Oak Ridge inside its concrete silo.
I only have two things to say: 1.) Good luck testing and gathering data on these ideas. You'll need it. 2.) Are you hiring mechanical engineers?
These in turn are inside a silo, which is inside the silo hall. All total there are four barriers to break through before we get radioactive release.
Further, the fission products are combined with fluoride upon forming (when you fission UF4 the uranium is split into two fission products and the F4 is available for recombining with the fission products). Most of the fission products like to stay in the salt so even if the salt gets spilled the fission products won't wander farther than the salt spill.