News for hackers. Stuff that matters.
Re:Underactuated Rotor for Simple Micro Air Vehicles by woah on Monday December 15, 2014 @10:05PM (#8755684)
Seems to me that the worst part of 3d printed stuff is "the grain" is there any way to fix that?
Re:Underactuated Rotor for Simple Micro Air Vehicles by TaylorAlexander on Tuesday December 16, 2014 @02:50PM (#8758968)
Well, parts made in a powder bed printer don't typically have nearly as much grain, if any. I'm a big fan of that style printer in the future, so one solution to the problem is to use those instead.

For typical FDM/FFM printers like the hobby ones you see everywhere, there are chemicals that can be used to smooth the print out.

I use my parts for robot prototypes where the function of the part is more important than cosmetics, so I don't worry about the grain. If I want a nice part though, I can use very fine layers.

Re:Underactuated Rotor for Simple Micro Air Vehicles by durkie on Monday December 15, 2014 @10:11PM (#8755706)
i was about to propose some sort of annealing process like they do with metals, and it seems like someone has already beaten me to it: http://3dprint.com/3388/study-how-to-make-3d-prints-stronger...

as a side note, this looks like kind of a cool way to smooth pla prints, for which up till now there wasn't really a great option.

Re:Underactuated Rotor for Simple Micro Air Vehicles by Vendan on Tuesday December 16, 2014 @11:29AM (#8757803)
that is a horrible article, considering the picture they are using is ripped off of a reprap blog on smoothing abs prints using acetone vapors. http://blog.reprap.org/2013/02/vapor-treating-abs-rp-parts.h.... (I'm actually a member of Fablocker, so I'd seen those squirrels before)
Re:Underactuated Rotor for Simple Micro Air Vehicles by durkie on Wednesday December 17, 2014 @12:15AM (#8761176)
well shit. we tried putting some big pla prints in the oven last night and they definitely just started warping and caving.
Re:Underactuated Rotor for Simple Micro Air Vehicles by Vendan on Wednesday December 17, 2014 @12:46PM (#8763280)
on that note though, from my experiments, acetone vapor bath does seem to strengthen abs prints some, cause it melts the surface together. Not terribly big effect, but it actually helps a lot for low infill parts and stuff.
Re:Underactuated Rotor for Simple Micro Air Vehicles by lsaferite on Tuesday December 16, 2014 @08:59AM (#8757109)
You can give the parts a vapor bath, but you lose some of the exactness. The longer you do it the smoother the part but the more it loses it's dimensions. You are basically melting the plastic with fumes.

http://hackaday.com/2013/02/26/giving-3d-printed-parts-a-shi...

Re:Underactuated Rotor for Simple Micro Air Vehicles by mistercow on Tuesday December 16, 2014 @02:21AM (#8756175)
That's a pretty big area of research apparently.