You'll frequently find 1-bit A/Ds and D/A at > 5Mhz on high fidelity systems. That 1-bit signal is converted to/from a higher bitrate, lower sampling rate signal without loss of fidelity. If you're interested in looking at alternate bitrate encodings you should just look at the Super Audio CD format https://en.wikipedia.org/wiki/Super_Audio_CD
On your second point, I agree, we live in a noisy world and hearing 144dB of dynamic range would require serious isolation.
What most people should be able to hear with 90Dbs of dynamic range, are the harmonics created by undersampling a high frequency signal. To quickly explain I'll use a 1-bit lower frequency scenario. Lets say we have a 2Khz sine wave and a 1-bit 5Khz sampling rate. The 2Khz signal is going to be represented by a different 2 samples every cycle. The result will be a signal that is no longer a sine wave and closer in frequency to 800Hz (wild approximation) than 2Khz. Low pass filters are used to to keep those harmonics from being too pervasive but they still sneak into the signal near the high frequency range. Transpose this example to our current audio standard and you might realize that in order to accurately represent the high end we need a little more than 16bit 48Khz.
In terms of attenuating the high frequencies before downsampling - have I misinterpreted Nyquist? I thought that there was no loss in fidelity, right up to half the sampling rate.
So you're right that you lose information as you go higher in frequency, but there is also commensurately less need for information to recreate it precisely because the filters remove the detail anyway (and if not the filters, the human ear).
Not if they can't hear the value in higher resolution audio. For many people the only difference in HD audio over 16-bit 44.1 Khz is that the files are bigger. If someone can't hear the difference, it's no surprise that they don't care to move to a new format.
The screen analogy isn't perfect as most people can still readily tell the difference between an HD image and a significantly lower resolution one. (Though yeah, we're getting closer to pixel densities surpassing people's ability to resolve pixels as well, provided they're not putting their nose to the screen. It won't be too long now.)
Don't argue from a position of ignorance. Make friends with a recording engineer and have them play you a 32bit mix followed by a 16 bit mixdown.
44.1kHz/100 = 441hz. But that's nonsense in the same way that saying that a signal at the Nyqvist frequency can be accurately encoded. @diroussle pointed out that you lose phase but there's another consideration, sync. If your signal at Nyquist is not in sync with the sampling frequency, then it's going to be represented as a signal offset, an out of phase line.
In any case, thanks for your patience, I'm glad to have cause to reconsider my position on this topic.
Take it from me, when you master 24 bit stereo tracks, and you don't dither, huge amounts of low level detail disappear. The detail in the quiets is there in 24 bit, and lost when its truncated to 16 bits. Add the dithering, and you get increased noise, but the detail comes back.
One could suggest that with dithering 16 bits can represent it. But that's with a whole bunch of noise added to the signal. You can argue that noise is not audible, but it is _just_, and when mastering you can audition the different dither spectrums to find which dither least impacts the music.
http://www.digido.com/articles-and-demos12/13-bob-katz/16-di...
At that point the issue may become moot as other problems like standing waves, harmonic distortion, inaccurate speaker frequency response and so on creep in and affect music playback to a subjectively larger degree than '16-bit versus 24-bit does', IMO.
All that said, 24-bit is definitely the way to go since we might as well do it right even if only x percent of listeners will notice.
As an aside, thank you for being one of the conscientious 'good guys' in the studio. I collect music and wish I had a nickel for every sloppy recording I've heard.
But for so long, for those of us who want a higher quality (hearing it exactly as they would have heard in the studio during the production) there was nothing we could do. Willing to pay more for it, doesn't matter. You just can't get it. It's still that way.
What gripes me is the attitude of many, including this xiph article, that hires versions "make no sense", that "there is no point" and thus everyone should just be happy with what they've got and that anyone protesting is an "audiophool" or believes in magic fairies or something. We all get lumped in with those people buying $3000 IEC power cables. For many people it's all black and white, there is no room for grey. You either think that 128kbps mp3s sound identical to the analogue master tape, or you are a fool spending $20,000 on magical stickers to increase the light speed in your CD player.
All I want is to be able to buy the mix and hear it as the engineer heard it in the studio. That would be nice. I know it's not for everyone, but it doesn't make me crazy.
As food for thought, have a read of what Rupert Neve said about Geoff Emerick's hearing ability (being able to discern a 3dB rise at 54kHz) here: http://poonshead.com/Reading/Articles.aspx
"The danger here is that the more qualified you are, the more you 'know' that something can't be true, so you don't believe it. Or you 'know' a design can't be done, so you don't try it."
There's definitely nothing crazy about wanting to hear a recording with as much fidelity to the master as possible. Yeah, I do remember people saying that 128 kbps MP3 was "CD quality" in the early days of the format, and that was a laughable claim indeed. One would have to be pretty tin-eared to think 128 kbps was hi-fi, although I'd say there were valid use cases for it, at least back when portable music players had storage in the megabyte range instead of the gigabytes we have today.
So many of those audiophile tweaks are just outright scams, and a fool and his money are soon parted. I guess education is the only way to combat that.
As for Emerick's ability to hear anything at 54 kHz, much less discern a 3 dB difference there, well, I am really, really skeptical. I'm obviously not in a position to say it's impossible, but it strikes me as an outright superhuman ability that should have been tested scientifically.
I can only speak from my own experiences, and I record and mix in 24/96 but for reasons that don't really relate to music distribution. When doing further processing, some plugins sound better with their algorithms taking 96k instead of 44k. Every plugin has been written with compromises. And I find I can push hires audio further in the digital domain before unpleasant artefacts arise.
It's very much like image processing. If you take a picture with a cheap basic 1 mega pixel camera and then play with the curves and sharpness, at a certain point smooth graduated colour becomes "posterised". If you take the shot with a DSLR (with 12 bits of each primary colour) then you can push the image a lot further before the posterisation occurs.
I have found the same occurs for audio. I can manipulate the sound with less artefacts when its hires. The plugins sound more transparent and smoother. I tend not to go above 96kHz because this effect is achieved at 96, and 192 (to my ears) sounds no better and I'd just have bigger files and more CPU load from the plugins processing the extra data.
The bandwidth of 96kHz is just short of 50kHz, so if as an added benefit I satisfy the one in a million Geoff Emerick's, then all the better.
But then once the final mix is rendered and no more processing needs to be done, ie for distribution, then this hires advantage seems moot. Maybe there is still some advantage for people or devices that may post process the sound digitally in some way, like a digital equaliser in your playback device, or something like that. But then again, that device could always upsample before processing.
I tend to use 88kHz if the final destination is intended to be CD, and 96kHz otherwise (so there is less aliasing when sample rate converting to 44kHz).
The reason I harp on about the bit depth is because in my experience that is where we are falling short. If I take my hires sources and convert to 44 or 48 with a high quality SRC I hear no difference at all. But when I change to 16 bit the difference is enormous. There is always a degredation. And it's never a good thing. It seems silly to just be throwing away that bit depth because of a 1982 format that people aren't even listening on anymore.
Also on the topic of SRCs, this site has some interesting comparison. For the record I do my SRC conversion with iZotope RX 64 bit SRC. http://src.infinitewave.ca/
So in conclusion, I want 24 bit tracks. If they're given to me as 44, 96, 192... whatever. As long as they're 24 bit. Enough with the 16 bit! :D
192 KHz has nothing to do with 192 kbps.
I'm one of those audio engineers who mistakenly thinks I can tell between an MP3 and a FLAC. Yet somehow I understand the difference between sample rate and encoding bitrate, and you do not.
All of this is besides the point. I'd much prefer a 24/44 sample than a 16/96 or 16/192. Bit depth has a much larger impact on the sound than sample rate.