[1] http://www.cypres.cc/index.php?option=com_content&view=artic...
Bad thing: Until then, they tend to not say much.
How would you build a CYPRES-style (barometric, integrated, cutter based) AAD for an event like this? And why would you not have it built into the seat?
Speculation: they wore standard bail outs sans AAD, like regular pilots. This guy either don't remember pulling or had the forces excerted on him and/or his gear pull for him.
Some "selling points" of the CYPRES-2: http://www.cypres-2.com/
Note how they call out that you can keep it activated on the ground, in vehicles, in pressurized cabins, etc. without fear of accidental automatic activation.
When a CYPRES is turned on, it calibrates itself and uses the current barometric pressure to determine the reference ground. When you enter an unpressurized aircraft and begi your ascent, the CYPRES will arm itself above a certain altitude (1000 ft normally). When you exit the aircraft, the CYPRES knows your altitude because of the difference in barometric pressure between the reference ground and the urrent pressure. It will also calculate your rate of descent from change in barometric pressure over time. It will activate if you're too low and too fast.
Notice how the environment is fairly static. You're jumping right above your reference. You're in an unpressurized vessel so the CYPRES can tell when to arm itself. You're starting a descent by exiting a level-flying aircraft. Any departure from normal operating limits and the CYPRES will not arm itself or activate at the proper speed and altitude.
You want a system like fighter pilots have and not something skydivers use. The environments are different, the operational requirements are different.
Was he wearing the chute on his back? (So,he had to get out of his seat to be able to open)
What kind of AAD was he wearing ? (was it an off the shelf AAD like a Cypress?)
What where it's settings? pass through such altitude at such vertical speed to open..
Any one knows? any links?