As the SparkFun article mentions, with the cost of the Wifi, powered hub, cables, SD card, and Bluetooth adapter add up. The Raspberry Pi is meant as a low-cost teaching computer, whereas what I want is a SoC to hack on.
Maybe it's as simple as programming it with the board and then detaching it and powering it.
If I want a SoC capable of doing low cost user-interface type embedded tasks I need parallel LCD support (or at least LVDS). I'd get an NXP LPC18/40 or an STM32 at the low end or an i.MX5/6 at the high end. Way cheaper with way better application support.
If I wanted to do IoT sensing/reporting, this whole thing is just overkill. Again, a low cost LPC or STM coupled with a GainSpan or TI radio module (that I can bake directly to my PCB). To me, and I could be wrong here, IoT isn't about putting 500 MHz computing resources at the nodes and certainly not for a $75 BOM adder.
At least the LPC and STM are chips I can put directly down on my board and run out of the box. An SOM with a single-sourced connector (and Hirose is notorious for designing unique stuff nobody else wants to duplicate) is just commercial suicide.
But, in my opinion, the examples you mentioned are not IoT. Unless you're planning to put one of these at every sprinkler head.
The Edison is intended for embedded applications - it has no display support built in (like DVI/HDMI), less USB support, and less "plug-and-play" ports.
SparkFun did a great write-up on unfair comparisons between the two platforms: https://www.sparkfun.com/news/1603