Re:The LED's Dark Secret (2009)
by clarry on Tuesday October 07, 2014 @03:35PM
(#8423459)
The diode itself produces only a peak in the spectrum. Phosphors are used to convert the light to a wide spectrum. There are different kinds of phosphors, and there can be multiple coatings of different types. So you can also have different qualities -- and the quality can be very good.
[ Parent
| on HN ]
> The diode itself produces only a peak in the spectrum. Phosphors are used to convert the light to a wide spectrum. There are different kinds of phosphors, and there can be multiple coatings of different types. So you can also have different qualities -- and the quality can be very good.
Thanks for the explanation. I've been learning a little about light sources; based on my limited knowledge, I wouldn't expect that the full spectrum (or spectral power distribution (SPD)) of daylight could be replicated by hacking together LEDs and phosphors, though perhaps the untrained eye would not be cognizant of the difference. Can they really pull off 'daylight'?
They've made fluorescent tubes with daylight spectrum for a long time (I recall seeing them available, but expensive in the 90s). Those work with phosphors, so I don't see why an blue LED pumped phosphor couldn't work as well as one driven by a near-UV mercury vapour lamp.
To exactly match daylight you would need all the visible light, plus infrared and UV, and a total power of 1 KW/square meter. The good thing is that the lamp would also work as a space heater.
True! Worked a lot in building broadcast studios and i usually went for http://www.bbslighting.com/products/area-48-soft-remote-phos... due to the Phosphor filter. Wonderful color representation from a small, efficient fixture.