If I understood it correctly, his privacy addresses issue wouldn't show up in that scenario, since it needs several days using the same network connection continuously for each host to accumulate enough privacy addresses.
The privacy addresses refresh depends on 2 factors:
1) preferred lifetime. http://tools.ietf.org/html/rfc4941#section-3.5 for more info.
2) frequency of reconnection. Some platforms (iDevices in particular) decide to make a new the IPv6 address every time they reconnect. Great for privacy (And that's exactly how I ran the abovementioned networks, also take a look at the http://tools.ietf.org/html/draft-desmouceaux-ipv6-mcast-wifi... for the observed leave/join stats), but if the infra does not have enough leeway to accomodate the extra addresses.
In any case even then not all is lost - clear the "A" bit in the RA to turn off the SLAAC, and use DHCPv6. Poor Android clients will be off the IPv6 grid because they don't bother to implement IPv6 for the reasons left unnamed here, but the rest of the gear will work just fine, with a single, predictable address, that an admin controls.
So, again - it all depends on the local situation and there's no unsolvable problems. There are existing and production-proven solutions.
Especially with installation media, it is just not feasible to custom script them to force Type1 usage. This makes bringup and configuration mgmt just rely on IPv4 to get an identity.
I'm running into difficulties with this in our campus deployment. - I need static addresses in DNS (DDNS is just dirty, especially with DNSSEC) and also reverse records for kerberos.
IPv6 just bums me out.
If you talk install, then with most of today's PXE ROMS first thing you want to do is to bootstrap into iPXE to get IPv6 support.
That gives you also the support for pulling in your install via HTTP, with passing the UUID via the parameter in the boot URI.
You can then drag this parameter all the way to the final boot of the client.
I've done a PoC for a zero-touch install setup where you boot up a fresh empty machine and after a while of unattended magic it ends up with the Ubuntu installed and configured to a hostname set to its UUID. The address is registered via DDNS but not direct from the client - it's done via call-home server.
IPvFoo independent and no need to tag to MAC address or any address family whatsoever.
I've a 20-page write-up draft with scripts and all, though needs a ton more polishing for the real world. If it's of use to you, drop me an email, I can send - would be interesting to hear your opinion on that.
It's too raw to just be dumped on the web, and I'd be curious to hear from a few folks doing this as a "day job" about the usefulness if I were to invest more time in it.
Or maybe the solution is to not use Juniper for ipv6. I really don't know. It's possible that Juniper's development process and goals prevented solid ipv6 support - another case where even if their engineers were aware, they couldn't do anything to help this guy.
E.g. Juniper support wasn't aware of it because they assumed no one would try to use stateless configuration in what would generally be a managed environment using dhcpv6.
Quite a few large environments use SLAAC and they work just fine (though I work for cisco so a bias is quite possible ;-).
But there's certainly something specific to MIT's setup that makes it melt down in such a spectacular fashion with v6. "Forwarding loops" (preexisting?) from the blog raise some suspicion.
The local environment frequently has a huge impact - and for the most extreme/"obvious" cases it took me to recreate the setup in the lab and show folks how it works fine with their config and traffic to make them believe that it was not just stupidly broken - because in their environment they could reproduce the bug every time!
Heh. Better not tell them about https://panopticlick.eff.org/ .
Seriously, tracking via your v6 address is a minor concern. Browsers already provide more than enough information to an advertiser to do a really good job of tracking a person as he changes his attach point to the Internet.
Let me ask you a question. (Please address this question, and not some hypothetical situation that isn't covered by this question.) If the combination of my User Agent string, screen resolution, and installed browser plugins uniquely identifies my PC, why should I be concerned that I also have a stable, globally unique IP address?
But the fact that there is a leak somewhere else in the house isn't an excuse to create another leak.
Also, browsers evolve and react relatively quickly. Not the IP protocol. When you see how hard it is to switch from IPv4 to IPv6, I don't think I will live to see IPv8! So making a disastrous decision from a privacy point of view in IPv6 will have long and lasting consequences. It's not because Chrome v30something is broken that we should leave a flaw in the IP design.
"In 2010, Eckersley demonstrated that benign characteris- tics of a browser's environment, like the screen dimensions and list of installed fonts, could be combined to create a unique device-specic ngerprint [7]. Of the half million users who participated in Eckersley's experiment, 94.2% of those using Flash or Java had a unique device ngerprint, and could thus be identied and tracked without the need for stateful client-side technologies, such as browser or Flash cookies."
Source: http://www.cosic.esat.kuleuven.be/publications/article-2334....
In any way this is a flaw in the current versions of the browsers, but by no mean a structural flaw that justifies giving up randomized IPv6.
I am addressing your assertion ("I personally see IPv6 adoption going to a full stall if users are told that advertisers found a way to tattoo cookies on their machines.") with facts that demonstrate that today, even behind an IPv4 double-layered CGN, your web browser makes your machine just as trackable as if you had a single, globally-unique IP address.
(In fact, if you've a mobile device of any sort, your web browser makes you more trackable than IPv6 [as deployed] does, as your address changes as you change attach points, but your device and browser fingerprint does not.)
ay is addressing your misunderstanding of the effectiveness of browser and device fingerprinting.
Neither of us are talking about removing "privacy" addresses.
I wonder if the genie is not already out of the bottle anyway. I think pretty much every recent version of windows that support IPv6 has randomized IPs turned on by default so this will require a lot of efforts to reverse this.
I am not expert enough to form an opinion on the problem described in the article but it looks to me more like a problem with the implementation of multicast than with randomized IPs, and therefore disabling randomized IPs (the solution the author opted for ultimately) is in my opinion not something I would like to see generalized.
And again browser fingerprinting is a short term problem. How many versions of each of the major browsers have we seen in 20 years, versus how many versions of the IP protocol have we seen over the same period?
This is correct. The issue at hand is talking about just how short-sighted and mis-informed this statement is:
"I personally see IPv6 adoption going to a full stall if users are told that advertisers found a way to tattoo cookies on their machines."
The only person who's talking about IPv6 "privacy" addresses is you. I don't understand why you keep bringing them up in a conversation about the effectiveness of browser fingerprinting.
I skimmed RFC 7217. It's not incompatible with "privacy" addresses. The RFC in question even mentions the orthogonality:
"The method specified in this document is orthogonal to the use of temporary addresses [RFC4941], since it is meant to improve the security and privacy properties of the stable addresses that are employed along with the aforementioned temporary addresses."
I don't see what your problem is.
If you're not interested in talking about the effectiveness or lack thereof of browser fingerprinting techniques, then I've no interest in continuing this conversation with you.
whether to allow the randomized addresses or not is a choice available today with no protocol changes whatsoever.
A network admin can turn off the "A" bit on the prefix in the router advertisements and turn on "M", and the compliant hosts will use DHCPv6 to get the address, which one will allocate statically per-user. This is exactly the same as "no privacy addresses".
I have to ask, have you even visited panopticlick? Go visit, using the browser that you typically use to browse the web. Slow your roll, and take time to actually understand what the site is telling you.
Also: "I believe that if this start being used, browser vendors will crack down on this".
You... are clearly not aware of what's happening in the Internet advertising space.
Visit https://panopticlick.eff.org/ (I mean it. Do this. Don't just blow hot air.) and ask yourself which of those things that the browser has been happily giving away for ages could easily be removed without breaking much of the useful functionality of the web.
- the fact that this signature works today (and I am not convinced it is actually so unique and stable to be really useful, again you don't have flash or java on iOS nor can you really customize the browser, so you will have lots of collisions) doesn't mean it will forever, for instance flash, java and silverlight are on their way out of the browser. And the more plugins and fonts you have, the more unique your signature is, the more likely it will change as a result of updating something (typically at least once a month) and therefore the less likely it will be useful to tracking you (your identity changes regularly).
- the fact that there is a flaw already doesn't mean we should introduce another one.
- IP protocol is evolving much more slowly than browsers and therefore a flaw in the IP protocol is a lot more problematic than a flaw in a current version of the browser.
Also, do check out my reply in the other thread with you: https://news.ycombinator.com/item?id=8282694
It's hard to achieve this in practice, but I keep it in mind as a goal.
In the 70s, TCP's inventors imbued it with solid fundamentals, but could not have anticipated how the protocol would need to evolve in the future w.r.t. security and performance. For IPv6, there are unknowns that will only encountered at scale, and implementors are hugely motivated to play fast and loose with the spec. (TCP Fast Open converts!)
Bottom-up systems have inherent wiggle room, and shipping them with sensible defaults is only possible in the short term. That's not to say we should design over-complicated systems, but just that fine tuners are not a weakness.
Every tunable parameter ought to be computable. If it isn't, it's because I haven't been smart enough to figure out how to auto-tune it.
At least that's the stick I bash myself over the head with. :)
But, designing a ship that 10 years post-release can fly and dig under ground on a whim is a pretty high bar - and would be interesting to learn of successes elsewhere, if you know.
Some of the "weird" IPv6 knobs today are actually very useful, though from what I know, I must've been one of the first known instances to abuse some of the non-defaults at a 10K+ users' scale.
So, I'd say - keep "no knobs" as a goal, but still leave the dirty knobs somewhere to turn in case of emergency. You'd be thanked, if by accident your protocol get used 15 years later :-)
It's completely true that good defaults are essential. But no one person is competent to make a decision for everyone everywhere. It should always be possible to change something but ideally it shouldn't be necessary.
I'm honestly surprised people don't take more advantage of "tuning the source" as an solution to providing end-user flexibility (the only project that I can think of that does is nginx.) Maybe it's because we have "dev ops" (devs who end up doing ops) but no "op devs" (operators who know how to code.)
But what I meant was that you shouldn't try to make modifications impossible. Yes, it's futile anyway, but it's a bad idea independent of that.
If you've designed the system right then the users shouldn't need to modify it. So if they do it's a signal that you've missed something and then you can improve it. Whereas if you declare yourself the final authority and refuse to facilitate user modifications, or worse actively interfere with them, then any mistakes you make are silently uncorrectable.
http://elementaryos.org/docs/human-interface-guidelines/avoi...
That said, it's still Linux, and if you really need more flexibility you can always pull chunks out and replace them with the usual alternatives.
As an example, here are the prefs for the built-in music player: http://i.imgur.com/Py7TkTR.png
How configurable is it compared to GNOME? Less configurable than that is really just "not configurable".
http://gfycat.com/UniqueInfamousCoypu
Since I put up a screenshot of elementary's music player already (http://i.imgur.com/Py7TkTR.png) that makes for a decent comparison. Here's Rhythmbox: http://www.gfycat.com/MenacingFreshIndianpalmsquirrel
How many users will want to change the file naming or folder hierarchy convention for their music library if they're managing them through a GUI application? Why is there a big list of "visible columns" checkboxes instead of setting that by right-clicking the columns? Does crossfade really need a whole tab for a checkbox and slider (and why does it need a checkbox when 0 seconds implies no fading)? Do people actually use crossfade anyway? I never have.
In short, there's room to clean a lot of things up. Even if it's minor, doing it across the entire system makes things a lot nicer. Plus there are some additional system-wide standardization features that elementary is doing, which should prevent a lot of inconsistency from software from all reinventing the wheel in different ways:
http://elementaryos.org/journal/contractor-not-sharing-servi...
http://elementaryos.org/journal/hig-update-popovers-decorate...
It's still a pretty new project, but as a relative Linux newbie I'm still having an easy time with it despite the comparatively small community.
I do.
Do people actually use crossfade anyway?
Yes.
The past decade has shown a disturbing trend in design. B-level designers think they can ape Apple by optimizing for the middle of the bell curve and alienating the edges. The problem is that the actual distribution of feature usage is multidimensional in a big way, and these designers delete features on one axis that otherwise very average users absolutely depend on.
There's the saying that 80% of users use 20% of features, but no users use the same 20%.
And re:crossfade, if people other than me really use it, then my complaint is that they added an entire "playback" tab in the settings for it. If there's only one playback setting, give it a header under General. It's the visual equivalent of a "for i in range(0):" loop; all it does is make your interface harder to read.
Noise is still an early version and I'm sure there are features that will be added, but "Print CD jewel case insert" isn't on the high priority list. That might have been neat when iTunes first added it, but it's just more cruft now. 1% of people might burn CDs in iTunes today, and only 1% of that 1% will even realize they could print an insert to go with it.
Even on OS X where every computer ships with a pretty effective (if not always snappy) media player, there are plenty of alternatives for people who don't like iTunes.
http://www.pixiapps.com/ecouteosx/
http://www.tomahawk-player.org/
http://www.audiofile-engineering.com/fidelia/
etc.
There are tons of reasons I don't like that format. It's extremely limiting and it only applies to a few genres of music. It tries to fit all music into a rigid hierarchy of bands, albums, and tracks, a hierarchy which applied to a reasonable amount of popular music from the '70s to the '00s, and it makes me wonder if the designers of music players ever listen to anything else.
Suppose the song is a collaboration. Which artist directory does it go in?
Suppose the song is a promo track that you downloaded from a band's website or from Bandcamp. What's the album? What's the track number? What happens when the track is eventually released on an album?
Suppose the "song" is the third movement of Bach's Unaccompanied Cello Suite No. 1 (BWV 1007) as performed by Yo-Yo Ma. Who's the artist? What's the album? (If you're going to say "the album that Yo-Yo Ma's recording was released on", you'll have to be more specific.)
Now can you give answers that put things in the same organizational scheme when it's the second chorale of Wachet Auf (BWV 140) as performed by the Bach Cantata Pilgrimage, directed by John Eliot Gardiner?
Suppose the song is Monstrous Turtles, by Zircon, a remix of Koji Kondo's "Super Mario World" music, released as OCRemix #1558. Is "OCRemix" an album under "Zircon"? Is it track number 1558? What about the fact that most OCRemixes are not by Zircon? Does it go in the same place if you download it from Zircon's web site instead of OCRemix?
And here are Rhythbox's five options for library folder naming.
http://i.imgur.com/Xl0XcGy.png
None of them will help you.
Your library sounds like a perfect case for unchecking the "Keep Music folder organized" and just managing it yourself, since there's no single pattern that will work for the whole thing. Incidentally, that's the one library organization option that elementary OS has.
And taking another look at Rhythmbox, either there's no option for "Let me organize my own damn files," or they hid it somewhere unrelated. Maybe you can launch it with a command line flag to do that...
If you have examples of tech to compare with - please bring them in!
EDIT: and yeah, a lot of knobs does sound like a bit of a poor design, but on the other hand, today, 1.5 decades later, I am grateful I can tweak some of the defaults!
Again, if you know something knob-less that'd get flawlessly deployed in 15 years after it was designed - shout, would be very useful to try and learn from that success!
I was looking for the example of the sparkly unicorn protocol from 2000 the people seem to evoke, which does not need any knobs and is available on every device to update some other protocol from 1970s.
(I suppose the hard meta-question to protocol designers is: how do you make sure your children will not hate you for the protocol you have imposed on them today ?)
With IP, all the intermediate nodes need to upgrade to use the new protocol (tunneling tricks aside).
This difference would probably be a significant factor in the speed of adoption. Tunneling obviously can emulate the 2-party model, but then we're left with the problem of managing the crazy amount of tunnels (and security issues) and sunsetting them.
Now if the ideas like http://tools.ietf.org/html/draft-vandevelde-idr-remote-next-... were discovered/implemented a decade ago - could that have been used to turn an N-party transition problem into a 2-party transition problem ?
With it, there are two distinct and not-really-compatible (since anyone in real world practice rarely cares about Unicode normalization) ways to specify a single Hangul character. And that should make text processing a bit painful.
You are going to have all sorts of edge case bugs and unexpected behaviors if you don't, definitely not limited to Hangul. There are multiple un-normalized ways to write all sorts of on-screen glyphs, including Latin alphabet ones.
But yes, with just 2 parties involved into any instance of the protocol enabling easy upgrade/downgrade path, and tight engineering it is indeed a beautiful protocol.
I can tell you haven't tried creating/setting up your own router with NATing, separate subnets (secure, insecure), inbound and outbound VPNs, firewalling and traffic shaping. Or basically anything non-trivial with IP in general.
The amount of knobs which you can (and must) set correctly for this thing to fly is enough to give an experienced engineer severe paranoia.
I'm not saying IPv4 is simple (especially if you want to do complex things with it) but it works well when configured correctly and is simple enough to be deployed in businesses of all sizes as well as home networks.
I didn't get involved with networking much until shortly after most other protocols were rapidly disappearing but the fact that IPv4 replaced IPX, DECNET, AppleTalk, etc in only a few years time suggests that it probably wasn't that much of a nightmare to set up, even in it's early days.
My concern with IPv6, based on this post, is that it may have lost some of the robustness and relative simplicity of IPv4. I mean layer 3 <-> layer 2 address mapping is fundamental to any network and if that's breaking with IPv6 it could be a pretty serious issue.
The internet was designed for end-to-end and works much better if you go along the grain on that.
Not everyone wants to expose their internal IPv6 address space to the outside world.
http://www.internetsociety.org/deploy360/blog/2013/12/free-e...
It's free, very high quality content, and it is written as if you co-design the new IP protocol together with the author - you start from "why" and arrive to "how".
If you have enough information to be sure that the author's situation isn't a genuine problem with IPv6, why don't you also have enough information to say what the administrator's mistake is, and its solution?
I don't mean to be snarky considering your generous offer to help, but your certainty that the problem isn't with IPv6 seems odd, given the specificity of the author's description and analysis.
But based on my experience with running the real-world IPv6 networks of large scale, there has to be a better solution than just "turning off IPv6" - even if it is a great interim band-aid after being up for 40 hours! (and I emphasize with that!)
The blog entry says: "The most serious issue is that there appear to be bridge loops occasionally being created". IS this something related to IPv6 ? Specific to IPv6 ? What's the root cause ? IPv6 with default settings in a larger net has very nonlinear behavior in the case of unreliable connectivity, and can make the situation worse.
The other issue, multicast group overload, should be solvable by making the switches blind to MLD. This will make it as "bad" as IPv4, but in todays' network size it will work fine because IPv4 works, mostly. Meantime they would need to kick their vendor's representative to have it fixed.
Also, a nit about the whole issue at hand: the "worst offender" is iOS, which will create a new privacy address everytime you disconnect and reconnect to WiFi. And if you were to "fix" that, imagine the wrath of the "privacy advocates" about this.
Privacy addresses in IPv6 are very valuable for a reason that due to a fast refresh cycle they help to uncover a lot of corner cases that would otherwise pop up with a kind of "shrug, something weird" type of RCA. And fix them before the IPv6 usage hits 50% (cf my comments on the other thread).
(From the privacy standpoint, privacy addresses are a pretty entertainingly weird construct.)
So to summarize this somewhat long-winded post: no question there's a problem. Whether it's in "IPv6 the protocol" or "IPv6 the vendor implementation" or "IPv6 the configuration" is another story. And that'd be something to understand and fix - but needs more info/context/legwork IMO.
The complexity and general human unfriendliness is a major downgrade from ip4 to ip6.
1) a s/w hang for which there was no way to advance in a getting a solid RCA. This alone is a very hard one, and I know the ugly feeling both from the customer's side and from the vendor's side when all you have as an action plan is to try to reduce the potential exposure to what you think the problem is. I've been there myself multiple times, both as a customer, and as a vendor support.
2) Bridge loops. You can fix an active loop by disconnecting links, but root-causing such a problem is not a piece of cake, by far.
3) A buggy client firmware. This particular nastiness has been unfortunately a bane of quite a few networks already - see http://packetpushers.net/good-nics-bad-things-blast-ipv6-mul... for the details about it, or https://www.mail-archive.com/[email protected]/msg55... for the first-hand encounters.
4) TCAM overload (?) due to privacy addresses rotation. "TCAM space dedicated to IPv6 multicast is only 3,000 entries. That would be just barely enough to support all of CSAIL". The network gear frequently allows to re-carve the TCAM space - maybe they might have taken some space from IPv4 which is by default is provisioned much more generously (for various reasons outside the scope for this thread).
Besides just brute-forcing, there might be other strategies in dealing with the temporary addresses - actually shortening the valid lifetime and bringing it closer to the preferred lifetime should work. This gives me some useful material to update my IPv6 troubleshooting talk with.
There are other scenarios in other setups that one can go out of TCAM, see e.g. http://lists.cluenet.de/pipermail/ipv6-ops/2013-October/0094...
So, no, MIT folks are by far not stupid - it's the problem that is complicated - and, after staying up for 40 hours, whatever helps to reduce the pain is good.
But I'm confident there's more learning here to be done from this unfortunate incident.
I personally ran WiFi networks with 8000+ wireless clients on a single /64 subnet (my employer's CiscoLive conference), and assisted/consulted in running the networks with more than 25000 clients on a single /64 subnet (Mobile World Congress).
The default kinda suck, and the bugs may happen. but the statement "IPv6 is not ready for production" is wrong.
I'd be happy to volunteer a reasonable amount of time to work with the OP or others having a network of >1000 hosts, to debug the issues like this, time permitting, vendor independent. (glass houses and all that).
There are bazillion knobs in IPv6 and a lot of things can be fixed by just tweaking the defaults (which kinda suck).
Network of <500-700 nodes generally don't need to bother much. It's not optimal a lot of times with the defaults but it will work.
EDIT:
the seeming "charity" of volunteering the time isn't. I want to understand what is broken, so we can bring it up back to IETF and get it fixed + make better educational publicity to prevent folks shooting themselves in the foot. It'll make it to the stacks in another decade, but it will. IPv6 is powering nontrivial millions of hosts now - so the correct words to use "needs tweaking for my network", not "not ready for production". Let's see what the tweaks are and if we can incorporate them into the protocol, if necessary.