From this[0] article:
> Today, cities use computer-controlled traffic lights that adjust their timing based on traffic levels, the time of day and even the number of trucks on the road. In Los Angeles, for example, city officials use traffic management to control their 4,400 traffic lights, reducing travel time by 12 percent.
[0] http://www.foxnews.com/tech/2014/08/05/high-tech-traffic-lig...
Naturally, it didn't register bikes. So if you wanted the light to ever change, you had to cross over to the left side of the street, go up on the sidewalk, and push the pedestrian button (no crosswalk on the right side of the intersection). Not much of a fan.
I'm not saying they're always bad, but they're not always good either. Maybe newer ones have improved on detection, but my understanding was that the sensor was induction based and required a big chunk of metal in order to spot you.
I suppose there is bias though, in that people don't notice as much when traffic lights are operating efficiently.
http://bikeportland.org/2010/09/27/bike-science-making-sense...
This shouldn't be a hard problem to fix. Sensors just need to be installed farther from the light to detect approaching vehicles earlier.
I think key infrastructure would probably be best left unexposed to the Internet, firewalled or not.
It does take some resources, so you typically don't see that sort of intelligent routing outside of the major cities (at least in the US), but the tech is definitely there (not that it couldn't be improved).
I can't count the number of times I have been waiting at a red left turn light, with a green straight light and no other cars around. Or, backed up at a red light with no cross traffic, yet cross traffic has a long green.
It is probably a complex problem to solve and suspect the biggest barriers are bureaucracy and control. Is there anyone on here that works with traffic lights? It seems like they are setup once with a predefined timing and are rarely ever changed.