Re:Ask HN: Object you'd like to see connected to the internet?
by ericfranklin on Wednesday August 06, 2014 @02:04PM
(#8143887)
I've seen the induction loops "presence" sensors too. One near where I used to live would never change to green unless the sensor was triggered, but wouldn't register until your car was beyond the crosswalk, nearly in the intersection. That means if someone in front of you stopped where they were supposed to, the light would never change.
I suppose there is bias though, in that people don't notice as much when traffic lights are operating efficiently.
Re:Ask HN: Object you'd like to see connected to the internet?
by maxerickson on Wednesday August 06, 2014 @02:05PM
(#8143891)
If the sensor there is an induction loop you might be able to figure out where it is and line a wheel up well enough that the metal rim triggers it.
Re:Ask HN: Object you'd like to see connected to the internet?
by wlesieutre on Wednesday August 06, 2014 @03:26PM
(#8144348)
I was never able to, but I didn't do a careful search for it. If only every city used that same bike icon to show you where the sensor is.
Re:Ask HN: Object you'd like to see connected to the internet?
by fredophile on Wednesday August 06, 2014 @02:40PM
(#8144088)
Probably not. From my experience bicycles and small motorcycles will not trigger the sensor on the induction loop.
Re:Ask HN: Object you'd like to see connected to the internet?
by maxerickson on Wednesday August 06, 2014 @02:57PM
(#8144189)
I looked around some before I posted that. This article seems respectable enough and at least supports the idea that bikes are intended to be able to trigger some of them:
http://bikeportland.org/2010/09/27/bike-science-making-sense...
Re:Ask HN: Object you'd like to see connected to the internet?
by fredophile on Wednesday August 06, 2014 @04:14PM
(#8144594)
It looks like those are specifically designed to be triggered by bikes. I've been at intersections with a 50-100cc motorcycle that would not trigger the light.
Re:Ask HN: Object you'd like to see connected to the internet?
by maxerickson on Wednesday August 06, 2014 @05:28PM
(#8144961)
I have the idea that they are broadly intended to work for bikes and the like but that they aren't always installed or tuned correctly.
Naturally, it didn't register bikes. So if you wanted the light to ever change, you had to cross over to the left side of the street, go up on the sidewalk, and push the pedestrian button (no crosswalk on the right side of the intersection). Not much of a fan.
I'm not saying they're always bad, but they're not always good either. Maybe newer ones have improved on detection, but my understanding was that the sensor was induction based and required a big chunk of metal in order to spot you.