This is known as the Corrective Action, Preventative Action (CAPA) process [0]. Note that the investigation into your complaint is an absolute requirement. Not just e-mails, but even phone conversations, or comments made in passing verbally - if any of them constitute a comment (positive or negative) on the device, this needs to be logged and, if the comment warrants it, an investigation must take place.
So either your comments have been or are in the process of being investigated, or the device manufacturer is not following the FDA rules.
[0] http://en.wikipedia.org/wiki/Corrective_and_preventive_actio...
We are required, however, to review our own code and maintain records of those reviews.
If there are complaints, FDA does sometimes review is the mountain of device related documentation. Design, assembly, maintenance, end user manuals, etc. Checking the paper trail. Is the paperwork done correctly, signed by a competent employee and reviewed by appropriate persons. There also needs to be watertight trail of employee training. Failure to have that does not end well!
Traceability (both physical and code) is another thing you better get right as a medical company. You need to know where, when, etc. each major component of the device came to be.
Medical companies literally generate so much paperwork, that separate storage facilities are needed for it. While you'd obviously have it in digital format for yourself, all of it is also printed out and signed.
Don't send random emails to people in the company, most people can't be held accountable for mishandling bug-reports (or ignoring them).
Look up the contact to send non-conformance reports in the user-manual of the device, there has to be a contact address, maybe even a (paper) form to fill out. Send it by paper-mail to the address (most likely the QA department). Request a classification of the issue (urgent, user-error, critical, ...) and an ID under which this issue is tracked. Set a deadline for replies to your inquiries.
If you really want to be serious, the FDA takes reports on defective medical products, here's a webpage on this process:
http://www.fda.gov/Safety/MedWatch/HowToReport/DownloadForms...
Fixing bugs in a medical device is not slow because it'd take a long time to fix the bug itself. It's slow because there's a lot of paperwork (Device History Files, specifications, tons of reviews, etc.) and system testing that follows. That's why you'd only correct issues that do not endanger patient safety once there are enough or when they can be combined with new features in firmware.
There's also always a risk that those fixed issues cause patient endangering bugs.
It can take almost one year from implementing the fix until it is running on any significant number of medical (imaging) devices in question.
FDA's rules are there for a reason. Although... someone should tell FDA git exists. It's silly to revision things manually in Word documents.
Anyone have any idea if this can be looked at by the end user? I'm not a radiation technologist of the flavour mentioned in the article, I'm on the diagnostic side. I use an MR scanner with numerous software bugs that I have reported but which remain. Similarly, the scanner can be made to display data which it says it is going to use in the next scan, but which it isn't. I suspected a bug and found the way to reproduce it. My last email listed 24 similar bugs (I've found more since) but other than a "thanks, we will forward this on" there has been no reply or comment. It is hard to imagine when this could be a safety issue, but it is a waste of valuable time, it is a waste of money and it's frustrating when I have gone to the trouble of working out the exact way of creating the issues. If anyone is interested, the interface is so god awful that instead of having an on off button or switch interface, the scanner gets the user to type 1 or 0 for on and off into a text field. Some fields take other values like 1, 2 and 3. Some take decimal values like 0 to 1 in 0.1 increments. There is no pattern to what the user is expected to type. Yuck. This data is not properly sanitized either, and you can make the scanner say its "doing" something it's not. Type in 1.999, and error message appears, the field corrects to 2.0 but the scanner does the thing that a setting of 1 would produce. These sorts of bugs occur all over the place.
Edit: The "thanks" email is the most positive I've ever got, my previous reports were me with statements like "we have some very experienced users who haven't had this issue" when there were clear safety problems with earlier scanner implementations (The scanner was producing axial slices at a location different to where I asked for them to be, on a spine patient due in theatre - good luck operating on the correct vertebral level). Its FDA approved and its on the latest software release. I have undergone manufacturer training and have had additional training half a dozen times at my request and at the manufacturers request after my bug reports were met with "you're doing it wrong". I'm not, the software is buggy and I have some excellent and amazing screen shots and camera phone video of the bugs in action.