News for hackers. Stuff that matters.
Re:How to Build a Raspberry Pi Radio Transmitter by edent on Sunday June 15, 2014 @11:13AM (#7895395)
This page basically says "Install this file, magic!"

If you want the technical details behind it, a good starting place is http://www.icrobotics.co.uk/wiki/index.php/Turning_the_Raspb...

Or the blog of the creator at http://www.omattos.com/node/19

Re:How to Build a Raspberry Pi Radio Transmitter by esbonsa on Sunday June 15, 2014 @03:14PM (#7896008)
I missed the icrobotics link that was submitted to HN 508 days ago unfortunately... but at least the link that I posted shows that you don't need any additional hardware to transmit on FM frequencies.
Re:How to Build a Raspberry Pi Radio Transmitter by unoti on Sunday June 15, 2014 @01:50PM (#7895792)
I'm a Ham radio operator, and interested in building my own real 2m/70cm transceiver that I can put in my car, complete with a little display to impress my friends and such. So these Pi articles interest me, but I'm more interested in interfacing a microcontroller to a real quality transmitter that can operate at, say, 25+ watts.

Ideally I'd like for this project to run Android, and drive my car stereo too, and do a bunch of other crazy things like GPS.

There's surprisingly little information out there on how to approach such a project. I've looked for components I could use on Sparkfun, and there's not really anything that jumps out at me, for either building 2m/70cm transceivers, or even for doing the stereo amplifier part.

I did find this fascinating article, though: http://hackaday.com/2013/02/28/hacking-a-ham-radio/

Re:How to Build a Raspberry Pi Radio Transmitter by th0ma5 on Sunday June 15, 2014 @03:05PM (#7895977)
Yeah I've been interested in the links out there around modifying the Baofeng radios and replacing the CPU in them with an Arduino or an generic computer interface.
Re:How to Build a Raspberry Pi Radio Transmitter by startrak on Sunday June 15, 2014 @01:16PM (#7895705)
Anybody have information regarding the strength of the output signal? I know the FCC here in the US very touchy about radio broadcast strength...
Re:How to Build a Raspberry Pi Radio Transmitter by synx508 on Sunday June 15, 2014 @02:01PM (#7895824)
It's definitely above the part 15 limits of 150 μV/m at 3m

I don't know the current drive capabilities of the Broadcom SoC, but let's assume it can perfectly drive a dipole antenna presenting around 72 ohms. The supply is 3.3V, I think. 3.3^2/72 = 0.15125W. In reality I doubt it's anywhere close to that, let's assume 50mW instead (it could be lower, I just don't know). According to a legit-looking field strength calculator I found online this works out to just over 0.5V/m at 3m! That sounds a bit high. Various factors would conspire to making even this much field strength unlikely, but it'd still exceed the FCC limits easily.

The Pi's output is also a reasonably decent square wave, as pointed out elsewhere. So there are some harmonics that are, themselves, above the part 15 limits.

In other words, don't do this, unless you have a spectrum analyzer, attenuator (don't forget to block DC). Actually, someone needs to do this with the right equipment just to find out how well it really performs.

Re:How to Build a Raspberry Pi Radio Transmitter by wwwwwwwwww on Sunday June 15, 2014 @12:59PM (#7895655)
fun semi-related EE design fact that readers may find interesting:

one of the fastest ways to tell that someone didn't know what they're doing when they designed a board is that they placed the oscillator anywhere other than right next to the component it drives. the traces that connect the oscillator to the component are basically an antenna - the longer they are, the stronger they broadcast. This becomes an issue when there are multiple oscillators in close proximity - their broadcasts can interfere with each other and cause them to synchronize. I forget what this effect is called but here's a neat video that kinda illustrates it: https://www.youtube.com/watch?v=kqFc4wriBvE&feature=kp

Re:How to Build a Raspberry Pi Radio Transmitter by zxcvgm on Sunday June 15, 2014 @02:11PM (#7895846)
A related hack: using the Pi to transmit at 433.92 MHz with minimal hardware [1]. This frequency is commonly used for remote controlled wall outlets and such.

[1] http://www.skagmo.com/page.php?p=projects/22_pihat

Re:How to Build a Raspberry Pi Radio Transmitter by cskau on Sunday June 15, 2014 @01:23PM (#7895727)
Does anybody happen to know if it's just as easy to read the pins at 91.25, 94.75, and 95.75 MHz?

Lately I've been trying to find a way to do exactly that - initially using audio in - but so far without any luck.

Re:How to Build a Raspberry Pi Radio Transmitter by th0ma5 on Sunday June 15, 2014 @03:05PM (#7895980)
The $20 RTL-SDR sticks can do this.
Re:How to Build a Raspberry Pi Radio Transmitter by esbonsa on Sunday June 15, 2014 @03:09PM (#7895992)
it appears that you can use any frequency (if you use a proper antenna for the chosen freq., you will get better transmitting range)
Re:How to Build a Raspberry Pi Radio Transmitter by Bob_Sheep on Sunday June 15, 2014 @11:54AM (#7895494)
I should point out that the pifm code is a bit of a hack and does not properly reset the DMA controller when you stop running it. It will leave the FM signal active until you reset the pi.
Re:How to Build a Raspberry Pi Radio Transmitter by lifeisstillgood on Sunday June 15, 2014 @11:13AM (#7895396)
Appears to have breached hosting limits (or some other 500)

Any caches? Seemed interesting

Re:How to Build a Raspberry Pi Radio Transmitter by petecooper on Sunday June 15, 2014 @11:56AM (#7895501)
Re:How to Build a Raspberry Pi Radio Transmitter by jashjacob on Sunday June 15, 2014 @02:25PM (#7895883)
We've set up CloudFlare. The website should be accessible now. The post went up on reddit as well, we couldn't handle the sudden inflow of traffic.
Re:How to Build a Raspberry Pi Radio Transmitter by BuffaloBagel on Sunday June 15, 2014 @12:47PM (#7895622)
Holy square wave harmonics Batman.