News for hackers. Stuff that matters.
Re:EcoVent: Make every room in your home the right temperatu... by dfc on Sunday April 20, 2014 @02:30PM (#7617906)
After reading the LBNL study mentioned in ecovent's whitepaper I do not know what is going on here. The LBNL study concludes:

  The closing  of registers led to  an increase in energy  use for the
  typical California  house and  duct system  used in  this study. The
  reduction in building load due  to not conditioning the entire house
  was more than  offset by increased duct system losses  mostly due to
  increased duct leakage.

  The  register closing  technique has  less impact  on energy  use if
  registers furthest  from the  air handler  are closed  first because
  this tends  to only  affect the  pressures and  air leakage  for the
  closed off branch. Closing registers nearer the air handler tends to
  increase the pressures and air leakage for the whole system.

  Closing  too  many registers  (more  than  60%) is  not  recommended
  because the  added flow resistance  severely restricts the  air flow
  though the  system to the  point where  furnaces may operate  on the
  high-limit switch and cooling systems may suffer from frozen coils.

Register Closing Effects on Forced Air Heating System Performance: http://escholarship.org/uc/item/4vw4v8wz
Re:EcoVent: Make every room in your home the right temperatu... by tech_nickl on Sunday April 20, 2014 @08:52PM (#7619110)
Hi, I'm one of the co-founders of ecovent. The LBNL study did not address systems that can monitor their impact on an HVAC system. Some homes have leaky ducts and some have very tight ducts. The only way to tell is to measure them. Our system does measure it's impact, and maximizes the comfort and savings available for a given system. We can also provide suggestions for improving your home, such as rooms that need insulation or ducts that are very leaky. The same principle applies to reducing the airflow too much with respect to high limit switches and coil freezing. We monitor and adapt to the situation. Please let us know if you have more questions.