Re:Building an open source Nest
by strick on Friday January 17, 2014 @09:56AM
(#7076025)
I was talking about a switch for the HVAC fan, not the nest itself. With the nest you have to fiddle through a bunch of screens to turn the fan on and off. It is a personal pain point of mine.
[ Parent
| on HN ]
Totally agree. I've been tinkering with my own project to do this. I wanted the recirc fan under programmable control as well to try and mix the house air once in a while and distribute the temperature a little better.
Nobody has ever offered this in a thermostat with the possible exception of the RadioThermostat CT30/3M50, which has a JSON API and lets you manually control the relays.
??? My 30 dollar third-world built brazilian crappy on-off thermostat has manual fan on and off. It can be programmed to turn on automatically when over/under a given temperature and also to not run for more than a predefined ammount of minutes.
As I understand it any temperature control designed for big refrigerators or freezers has this features. Some even allow you to pre-configure fan cycles (i.e. on for x minutes, off for y, repeat) and turn the cycle on or off depending on temperature or compressor state.
Re:Building an open source Nest
by AaronBBrown on Friday January 17, 2014 @10:29AM
(#7076228)
EcoBee thermostats give you the ability to set your fan to always on via the thermostat, API, and web interface.
This is my #1 gripe with The Nest.