News for hackers. Stuff that matters.
Re:AMD launches Kaveri processors aimed at starting a comput... by ak217 on Tuesday January 14, 2014 @12:43PM (#7058430)
You are looking at a picture of the surface of the silicon chip with the circuits etched on it. I'm not sure what the holes are, there are too many of them to be wire pads, perhaps this design uses holes to aid in heat transfer. The colors are post-processing added to the image to highlight different functional units of the chip - I'm not sure what they all mean in this case, but on CPUs, the largest/most uniform areas are always the L2/L3 cache.

If you pick up a packaged CPU, you can't see this surface unless you rip the package apart. In a package, this surface is mounted face down on a tiny PCB which connects the wires to pads or pins for the socket that the CPU is inserted into, and also, a metal lid is slapped on top of the silicon chip (with thermal paste in between). Then a heatsink is slapped on top of the metal lid.

Re:AMD launches Kaveri processors aimed at starting a comput... by sliverstorm on Tuesday January 14, 2014 @01:07PM (#7058601)
Holes? Do you mean the grid of dots? Those are the flip-chip equivalent of wire pads.
Re:AMD launches Kaveri processors aimed at starting a comput... by ak217 on Tuesday January 14, 2014 @10:56PM (#7061575)
There are too many of them to be wire pads.
Re:AMD launches Kaveri processors aimed at starting a comput... by sitkack on Tuesday January 14, 2014 @07:46PM (#7060912)
Just had an idea. Put holes in the die for gas flow, if there is a keep out region around the hole the flow will remain laminar at the edges provided the pressure balance is correct and not interfere with the chip. Cooling gas could flow directly through the chip.
Re:AMD launches Kaveri processors aimed at starting a comput... by sitkack on Tuesday January 14, 2014 @07:49PM (#7060922)
Next up, microfluidic channels and on chip expansion chambers.