News for hackers. Stuff that matters.
Re:Shaft passer by chm on Thursday November 28, 2013 @10:00PM (#6817676)
This image [1] explains the mechanism better. Next, imagine the cord is in fact the shaft of another pair of wheels.

[1]http://drgoulu.com/wp-content/uploads/HLIC/849e60a7d99c30c2a...

Re:Shaft passer by randomfool on Friday November 29, 2013 @12:40AM (#6818034)
The workers at the Ballard locks in Seattle used to use these because of some safety regs (for a short while). They all hated them because they jammed up all of the time.

Wish I knew the name of the mechanism they used, it looked interesting enough to get me talking to one of the workers about it.

Edit- the best I can find is either something called a 'starpass glider' mentioned on page 14 of http://s7d9.scene7.com/is/content/minesafetyappliances/Horiz...

or http://www.saferack.com/lifeline-cable-systems-fall-protecti...

The system I saw at the locks seemed like a better engineered system, from what I remember.

Re:Shaft passer by asdfs on Thursday November 28, 2013 @11:10PM (#6817857)
I wonder if that image is in public domain. Might be nice to add to the page.
Re:Shaft passer by mvleming on Thursday November 28, 2013 @11:43PM (#6817922)
Is it? I don't know how to look for whether a photo is in the public domain, but I did just Google with the image. https://encrypted.google.com/search?tbs=sbi:AMhZZisuyc26lmhJ...
Re:Shaft passer by chm on Friday November 29, 2013 @02:03AM (#6818232)
Re:Shaft passer by dwaltrip on Friday November 29, 2013 @03:56AM (#6818500)
How is the top curved portion (that "cable to mine" connects to) affixed to the gear and thus the other half of the cable? I can't tell from the picture. If it is simply connected to the gear axle, won't that block the sweep wire from passing through?
Re:Shaft passer by LancerSykera on Friday November 29, 2013 @04:00AM (#6818511)
The teeth of the wheel are holding on to it, and it looks like there are always two teeth inside the top.
Re:Shaft passer by dwaltrip on Friday November 29, 2013 @05:18AM (#6818732)
Oh I see what you mean. The teeth slide through the curved channel, and are notched such that the channel is held in place. That is a clever design.
Re:Shaft passer by jarin on Friday November 29, 2013 @05:37AM (#6818788)
It's clever as long as you operate in a zero-friction environment :)
Re:Shaft passer by lambda on Friday November 29, 2013 @12:55PM (#6820318)
I'm wondering if the effects of friction could be mitigated by having ball bearings within the channel that the teeth pass through.
Re:Shaft passer by sanoli on Friday November 29, 2013 @06:16AM (#6818936)
That's what I thought also. Wouldn't the amount of force pulling on the cable lead to some jamming as soon as the little spokes stopped spinning so freely?
Re:Shaft passer by foobarqux on Thursday November 28, 2013 @11:41PM (#6817914)
No kidding:

"The device works by using a spoked, rimless wheel that allows cables to pass through as it rotates. The ends of the spokes are widened, and the cable is held together by a short curved sleeve through which these spoke ends slide."

Re:Shaft passer by elwell on Saturday November 30, 2013 @11:16PM (#6826070)
I think the most interesting thing about that image is that the text seems to be written by hand. What excellent handwriting!