Re:Flutter: $20 Wireless Arduino with 1 km range
by stevenrace on Tuesday August 27, 2013 @06:19PM
(#6286653)
Agreed. This isn't going to form the 'alternate Internet' that some people are clamoring for. But there are tons of applications (machine->machine) where a basic serial/ssh is all that's required.
We've had similar hardware in the field for 3+ years now, covering ~50 square kilometers in a mesh configuration.
Re:Flutter: $20 Wireless Arduino with 1 km range
by TaylorAlexander on Tuesday August 27, 2013 @07:24PM
(#6286975)
Absolutely! There's lots of hardware around, but being able to turn an Arduino project into an emergency beacon or IP link has some benefits too, and $20 is likely cheaper than what's been around. At $20 these are commodity prices, which I don't think we've had for high quality general purpose computing + wireless platforms.
Re:Flutter: $20 Wireless Arduino with 1 km range
by stevenrace on Tuesday August 27, 2013 @08:06PM
(#6287188)
It's always good to see cheaper hardware - our early 'proof of concept' hardware were based on an 'Arduino FIO' + 'XBee Pro' which came out to ~$60. Then quickly migrated to a TI MSP430 + CC2500(CC1100) which slashed the price to <$20 all told. We're now on the ARM M3/M4 SoC bandwagon as well. So I understand that angle.
I'm sorta curious as to what you plan on using the $80k for. Are you going to farm out PCB fabrication to OSHpark/China/whatever - or get a pick and place machine, CNC mill, and try to do everything inhouse?
Anyways, best of luck with the project.
Re:Flutter: $20 Wireless Arduino with 1 km range
by TaylorAlexander on Tuesday August 27, 2013 @10:18PM
(#6287643)
We have a lot of resources for manufacturing in China. I've personally ordered a few thousand assembled boards from Gold Phoenix through the course of my old job, which was... fun.
We've got a lot of connections in Silicon Valley to tap too for finding hardware partners. I'm not particularly interested in becoming a fab house, unless it's cheaper (including headaches).
Thanks for the well wishes!
One of the things needed to get full IP routing working is to do channel switching over the sub-GHz connection. Both the FCC and ETSI regulations let you transmit at a higher power and with longer bursts if you switch channels with a regular interval and if you back off if you find other transmissions in your channel.
That said, TCP/IP routing over a sub-GHz CC1101 link isn't going to be very fast. It is suitable for automated devices but not a general purpose replacement for WiFi connectivity. For IEEE 802.15.4g-compliance, the raw bit rate is 50 kbit/s which isn't a lot. The CC1101 can be run in faster, non-802.15.4g compliant, modes though.