News for hackers. Stuff that matters.
Re:Hyperloop by pjungwir on Monday August 12, 2013 @04:54PM (#6201819)

    The key advantages of a tube vs. a railway track are that it can be built above
    the ground on pylons and it can be built in prefabricated sections that are
    dropped in place and joined with an orbital seam welder.
Did anyone else read this and imagine laser beams fired by satellites?
Re:Hyperloop by gaoshan on Monday August 12, 2013 @05:21PM (#6202070)
But in China vast expanses of high speed track are built on pylons. Here is an example of one such track (and some unfortunately placed apartment blocks): http://msnbcmedia.msn.com/j/MSNBC/Components/Photo/_new/pb-1...
Re:Hyperloop by druiid on Monday August 12, 2013 @05:02PM (#6201889)
Not really. It's a valid welding http://en.wikipedia.org/wiki/Orbital_welding), but I imagine it might be quite a task to scale it up to pipes as large as would be needed for this project.
Re:Hyperloop by hyperbovine on Monday August 12, 2013 @05:10PM (#6201975)
For some reason Elon Musk is extremely enamored of welding technology. I remember seeing a page on an old version of the SpaceX site containing a high-level overview of the Falcon 9, where they went out of the way to mention how great circumferential friction stir welding is compared to whatever NASA used to do. And here he is bragging about it being the large stir welded thing ever created: http://www.nasaspaceflight.com/2009/01/musk-ambition-spacex-.... It's a revolutionary vehicle in many regards, but Elon seems to have a particular soft spot for welds.
Re:Hyperloop by digikata on Monday August 12, 2013 @05:40PM (#6202241)
Makes sense, most of the volume in a rocket is a tube structure. I imagine that SpaceX has spent a lot of time evaluating ways to precisely and cost-effectively build tubes...
Re:Hyperloop by spikels on Monday August 12, 2013 @05:15PM (#6202033)
Orbital welders can be used in pipes on any size (smaller sizes often need special welders). Not sure what the record is but they are commonly used on water pipes that are several meters in diameter. Should work fine for the Hyperloop tube. Seems like all the required technology is proven but I'm sure we will hear more from all the experts in the various fields.
Re:Hyperloop by babas on Monday August 12, 2013 @07:02PM (#6202782)
Orbital welding on this scale and much larger is already done in the offshore oil industry.
Re:Hyperloop by hristov on Monday August 12, 2013 @05:44PM (#6202271)
I do not get this part. These are not advantages of tube v railway track, because a railway track can also be built above ground and can also be build from prefabbed sections. In fact I would think that building a railway track would be much cheaper than building an airtight tube.
Re:Hyperloop by DannyBee on Monday August 12, 2013 @06:25PM (#6202581)
Railway track built above ground has to support weight of the cars, which seems significantly higher ....
Re:Hyperloop by benjamincburns on Tuesday August 13, 2013 @03:33PM (#6207743)
Unless Musk has found a way to make the cars weightless, the tube must support the weight of the cars. Further, the pylons must support the weight of the tube and the cars, over a smaller footprint.
Re:Hyperloop by DannyBee on Wednesday August 14, 2013 @07:59PM (#6215301)
Railway cars weigh approximate 30 tons (unloaded) to 140 tons (loaded).

Even a Ford F150 truck only weighs 2 tons.

Re:Hyperloop by mmanfrin on Monday August 12, 2013 @05:08PM (#6201964)
Well how else would you propose welding them together?
Re:Hyperloop by jere on Monday August 12, 2013 @05:45PM (#6202277)
I immediately imagined drones in FTL. Some shoot lasers, others shoot beams, and a few can repair your own ship while orbiting around it.
Re:Hyperloop by knes on Monday August 12, 2013 @05:07PM (#6201937)
I did. It would be so cool :)