Re:Ultrasonic Networking via Web Audio
by jared314 on Thursday August 08, 2013 @05:20PM
(#6182006)
The same technique was used in the first TV remotes[0]. It drove people with good hearing nuts, had interference issues with natural phenomena, and had fundamental bandwidth limitations.
Otherwise, it is a cleaver hack around the lacking device-to-device wireless support.
Re:Ultrasonic Networking via Web Audio
by dave1010uk on Thursday August 08, 2013 @06:05PM
(#6182286)
This looks similar to what http://chirp.io/ is doing, only more open. It's great to see interesting advancements like this, especially using web technologies.
Re:Ultrasonic Networking via Web Audio
by stephengillie on Thursday August 08, 2013 @05:14PM
(#6181968)
Cool! I'm wondering how this could be used (or interfere) with a Parallax Ultrasonic Ping sensor for Arduino and other microprocessors. Maybe attaching the Ping sensor to a RasPi's GPIO (general purpose in/out) pins will allow for ultrasonic RasBMC remote?
Re:Ultrasonic Networking via Web Audio
by mbell on Thursday August 08, 2013 @06:25PM
(#6182397)
Doubtful, any purpose built ultrasonic sensor will likely be running at much higher frequencies than you can play with via a standard audio chain. The Ping for example runs at 40khz but the most you'll get out of a standard issue audio chain is ~20-24khz, depending on the corner frequency of the analog filters on the input / output and driver / mic response.
Re:Ultrasonic Networking via Web Audio
by mbell on Thursday August 08, 2013 @08:40PM
(#6182983)
That is interesting...assuming you can address individual devices and get some concept of relative position you can likely create some pretty interesting psychoacoustical effects with that many point sources. Probably highly dependent on being able to control relative latency though.
Re:Ultrasonic Networking via Web Audio
by danpeddle on Saturday August 10, 2013 @10:35AM
(#6191200)
The same concept is currently being used by the Hex3 JAJA stylus to communicate pressure information - it is really quite elegant. http://www.hex3.co/products/jaja
Otherwise, it is a cleaver hack around the lacking device-to-device wireless support.
[0] http://en.wikipedia.org/wiki/Remote_control#Television_remot...
We used it to sync audio across devices to create one huge stereo; all play same audio in unison.
Here's a demo vid of 50 people & their devices blasting a public domain song http://vimeo.com/71647538 in sync.
We're a bit weary of blasting the "good," music across devices in any demo due to the public perfomance copyright act.
We have a long list of ideas (one you speak of and many more) we'll be shooting video of in the coming days and weeks.
We're thinking there are a ton of use cases and innovative/interesting things that can be done using http://SpeakerBlast.com :-)
https://news.ycombinator.com/item?id=5964173
In undergrad I made a super-ghetto optical frequency-multiplexed parallel port; it hadn't occurred to me to do the same with web audio.
Hmm....
edit - at least, the emoticon demo on a macbook air does.