Re:How to Build a HUD for your Car
by diminoten on Sunday June 30, 2013 @05:00PM
(#5967177)
It doesn't solve the #1 problem all HUDs have to solve - view obstruction. That's a very significant portion of your view being effectively removed by the scotch-taped + suction-cupped piece of glass which should be transparent.
Re:How to Build a HUD for your Car
by millzlane on Sunday June 30, 2013 @05:07PM
(#5967215)
There is a reflective tape you buy specifically for cars that came with HUD from the factory. You could also measure the tach signal for a tachometer too.
Re:How to Build a HUD for your Car
by Cookingboy on Sunday June 30, 2013 @05:35PM
(#5967323)
From the pictures it looks like the projection is focused on the film (also true for OP's link), where as in newer HUDs (such as my 2013 BMW) it looks like the projection has infinity set as the focus thus achieving the result of it looking like it's floating in a distance, and I don't need to adjust the focus of my eyes to look at the contents of the HUD.
But I have not reviewed the tech spec, it just seems this way and the videos/pictures in OP's link and your link look way too jarring.
Re:How to Build a HUD for your Car
by BillWong on Tuesday July 02, 2013 @06:44PM
(#5981220)
Hey I'm Bill Wong, the guy that wrote that blog post. The glass on this design was mounted with suction cups (no tape) and placed about where the tree line is in the driver's field of vision. I didn't feel it was obstructive for normal driving, but it did sometimes get in the way when looking or turning left.
I'm still working on this project, and I hope to solve this issue in a future design. Any suggestions on how to securely mount the glass without obstructive supports?
Re:How to Build a HUD for your Car
by ChuckMcM on Sunday June 30, 2013 @07:02PM
(#5967646)
Pretty cool, next up use a Raspberry Pi with a pico projector and you've got all the data you ever wanted to distract you :-). I've noticed that some of the HUDs on the market actually put the display fairly low on the windshield so it is above what you would normally consider the dashboard but in terms of what it is obstructing in the view its where your eyes would be looking at the hood of the car.
Re:How to Build a HUD for your Car
by Amadou on Sunday June 30, 2013 @10:18PM
(#5968268)
Has anybody experimented with a pico projector? I've been thinking that a HUD would be a fantastic application since some (most?) pico's have infinite focus. Some of the newer ones are pretty bright too - especially if you only need to illuminate a couple of square inches instead of a couple of square feet.
Re:How to Build a HUD for your Car
by ChuckMcM on Sunday June 30, 2013 @11:10PM
(#5968417)
I've got two of them (both from Woot). One is 10 lumens the other is 15. Both are fabulous when camping, they are pretty easy to watch indoors at a couple of feet in all lighting conditions (10 - 18" diagonal) and mildly amusing in a dark room at > 100" in size.
They do get warm so having them on the dash would either require some forced air cooling or a different mounting system. Paired with a webcam they let you reproduce the 'put a controller on anything' [1] stuff that Microsoft showed off.
Re:How to Build a HUD for your Car
by Amadou on Monday July 01, 2013 @01:46AM
(#5968911)
Have you tried taking one out to the car and shining it up on the windshield during the day? Without any special windshield coatings you'll get a double-image, but at least you can get an idea of how visible and focused it would be under normal driving conditions.
Re:How to Build a HUD for your Car
by eksith on Sunday June 30, 2013 @06:10PM
(#5967450)
I'm sure there are some jurisdictions in which this would be illegal.
In some places, certain "traffic aides" are outlawed E.G. Radar detectors. While it could be argued that this doesn't help you evade police, the fact that it's an extraneous (potentially distracting) "thing" attached to the windshield could be a legal hiccup.
Re:How to Build a HUD for your Car
by eksith on Monday July 01, 2013 @12:05PM
(#5971526)
That's very true. To be fair, this is highly, highly experimental so first iteration will be the proverbial ducktape and cardboard solution.
I think future versions will have the device embedded directly into the dash and fastened someway to prevent dislodging in a crash. There are polycarbonates that can take the place of glass to serve as both projection surface and combiner (though these might be pricey).
Once attached using solvent, these are very sturdy. So sturdy, in fact, that they're used in high capacity fish tanks.
Re:How to Build a HUD for your Car
by ISL on Sunday June 30, 2013 @04:49PM
(#5967134)
Cool!
For a poor, but effortless, way to try out a HUD, the OBD app Torque has a HUD mode that inverts the display. Put your phone on your dashboard while driving at night, and you get a HUD-like effect (with a different focal plane).
Re:How to Build a HUD for your Car
by csmatt on Sunday June 30, 2013 @06:12PM
(#5967458)
I was going to mention this if someone else hadn't. Also, here is my solution to viewing data from my car http://csmatt.com/notes/?p=5 . I use and love the Torque app (as seen in the last pic)!
(http://www.ebay.com/itm/Head-up-display-OBD-II-HUD-S-200-Typ...)
I'm still working on this project, and I hope to solve this issue in a future design. Any suggestions on how to securely mount the glass without obstructive supports?
They do get warm so having them on the dash would either require some forced air cooling or a different mounting system. Paired with a webcam they let you reproduce the 'put a controller on anything' [1] stuff that Microsoft showed off.
[1] http://www.kurzweilai.net/wearable-projection-system-turns-a...
In some places, certain "traffic aides" are outlawed E.G. Radar detectors. While it could be argued that this doesn't help you evade police, the fact that it's an extraneous (potentially distracting) "thing" attached to the windshield could be a legal hiccup.
I think future versions will have the device embedded directly into the dash and fastened someway to prevent dislodging in a crash. There are polycarbonates that can take the place of glass to serve as both projection surface and combiner (though these might be pricey).
Once attached using solvent, these are very sturdy. So sturdy, in fact, that they're used in high capacity fish tanks.
For a poor, but effortless, way to try out a HUD, the OBD app Torque has a HUD mode that inverts the display. Put your phone on your dashboard while driving at night, and you get a HUD-like effect (with a different focal plane).
*me
(that said, I bet it works great. A movie in the mirror is still a movie)