Re:Connecting an iPad retina LCD to a PC
by joezydeco on Monday April 22, 2013 @05:31PM
(#5591885)
You'll have to buy the connectors and solder them on yourself.
Just FYI, those SMT flexible-printed-circuit connectors are a bitch to get soldered onto a PCB correctly. You might survive with a lot of flux and a very thin tip (and a microscope since the plastic will melt at a pretty low temp. No mistakes allowed).
You might do a little better with a hot air gun. But this is not level-1 soldering.
Just FYI, those SMT flexible-printed-circuit connectors are a bitch to get soldered onto a PCB correctly. You might survive with a lot of flux and a very thin tip (and a microscope since the plastic will melt at a pretty low temp. No mistakes allowed).
You might do a little better with a hot air gun. But this is not level-1 soldering.