But if people just write a note, or anything they intend to come across as "not too stern, not too serious, but also not too boring" there is just Comic Sans, in the default list of Windows fonts.
Like another commenter said, it's like a market is underserved. Except it's not a market, because it's Windows' default font list (there's enough alternatives on the market). It needs another informal, slightly quirky font if you want to break the reign of Comic Sans. They might have gone a bit in this direction with Calibri (subtly rounded) and Candara (playful) but those are way too subtle to notice in the (oddly tiny) font selection lists.
And something else, IMO, Times News Roman is for me the example that, apart from popularity and being an over-used default font, there is something extra wrong with Comic Sans. After all those years of being negatively conditioned with Times as the default Apache 404 Error font, and so many other places, all that's caused is a strong notion of neutrality and blandness. I don't dislike Times, and I also believe there is no discussion on that it's strictly better designed than Comic Sans: it's got more glyphs, the letter forms are more constant and harmonious, etc. And with some thought[0], you can combine it with another font (Arial being the obvious choice) and use it in a headline/body text combo, and it actually doesn't even look half bad. Somebody put some thought in that, it looks clean and they just happen to be two of the most-used fonts. I challenge anyone to pull that off with Comic Sans, even in combination with another font.
Personally I think, add just one cool informal font to the Windows default list, and IMO it will be fine. Really the thing that bothers me most about Comic Sans is that it's the only choice [for people not savvy enough to install extra fonts], so I can't really fault anyone for using it because any alternative I could suggest involves quite a bit of extra work for them (in addition it might revert to some default font on the next office PC where it's not available).
[0] this almost always means: whitespace
For me it was anything but those. :-) +1 for Palatino/Garamond. I also read somewhere that Garamond uses less ink too (but readability on A5 for fonts less than 11 pt is somewhat hard)
Serif: I am partial to Century Schoolbook myself because it is eminently readable by all ages (on 10pt no less!) on A5 sizes. (I read somewhere that this was the first font that launched Knuth's imagination on kerning, etc. (in a nice way), and his life long fascination for typography)
Sans-Serif: Century Gothic - thin but very readable on small sizes as well. I later found out that this font takes up less printer ink while being printed as well. So double yay!
>> Please consider branching out and using something else for your next document
Very true. At least in this day and age of fontsquirrel, dafont, urbanfont, etc. etc.... there is no excuse to spend at least 15 mins to look for some interesting fonts. :-)
while these sites are fine if you're looking for a cool display font for a poster or something, it's quite hard to find fonts there suitable for heavy use because many of them are really (really) badly kerned and miss many glyphs you need in most texts.
there's probably a few to be found there (especially on FontSquirrel), but it's real hard to tell before downloading and trying them on a full paragraph, as the sites are very specifically designed to answer the question "does my short title / logo look good in this font?" instead of "is it a good font to use in Word?".
I've found a few good ones on them (see my reply to Century clones elsewhere on this post) and a looooot of bad ones as you mentioned. And sadly, poster/logo is not my area, but body text is.
> but it's real hard to tell before downloading and trying them on a full paragraph
+1 :-/ I know what you mean. (Mido comes to mind immediately!)
Perhaps Smashing Magazine is not very popular around here(?), but I check back now and then with them, since they provide links to some very interesting and complete fonts from time to time.
When Microsoft released Windows Vista in 2007, it included new typefaces some of which I think are really nice.
- Calibri (a lovely sans-serif design) and Consolas (a monospace typeface) were designed by Dutch type designer Lucas De Groot [1]
- Cambria (a serif typeface) was designed by the Dutch type designer Jelle Bosma, Steve Matteson (who designed the popular Google-commisioned font Open Sans) and Robin Nicholas.
- Constantia (another serif typeface) by the Canada-based type designer John Hudson
To see examples of all of these fonts, see http://www.ascendercorp.com/catalog/microsoft/clear-type-fon...
There's no need for Windows' users to default to Arial or Times New Roman anymore. Excellent aletrnatives that come with the OS have been available for many years.
I still haven't found a free version of it on the net though.
You're welcome. ;-)
These sets below, are complete (R, SC, B ,IT, B+IT...) fonts AFAIK.
http://www.dafont.com/justus.font
http://www.fontsquirrel.com/fonts/Latin-Modern-Roman
http://www.fontsquirrel.com/fonts/TeX-Gyre-Schola
http://www.fontsquirrel.com/fonts/TeX-Gyre-Bonum -- Bookman clone.
These are not complete, but they are close relatives.
http://www.fontsquirrel.com/fonts/Theano-Didot
http://www.fontsquirrel.com/foundry/Alexey-Kryukov
http://www.fontsquirrel.com/fonts/Old-Standard-TT
http://www.fontsquirrel.com/fonts/Bentham
http://www.fontsquirrel.com/fonts/DubielPlain
http://www.fontsquirrel.com/fonts/Theano-Modern
Here are some ripoff fonts...
[1] http://sarabot2000.typepad.com/sara/images/2007/06/05/chicag...
[2] http://3.bp.blogspot.com/_4tQRaybbR9Q/TVIPdMUeGhI/AAAAAAAAA9...
[3] http://1.bp.blogspot.com/_4tQRaybbR9Q/TVIUjyKhjsI/AAAAAAAAA_...
Seriously, people don't care and they don't choose Time as much as it is either the default or the only font they know of.
And honestly, I use the default pretty much all the time (which seldom is Times nowadays). Back in early school I was told Verdana was better and since it was more spacious that made a strong argument for it as well, since it was easier to fill a page... I truly don't feel that I can say that a font is better than another one. It might look better but that might just as well be in a comic-sans way which would just be a disaster. Afraid of that I keep to the default.
Word processors should be much better at communicating this, the only thing they do is give you a default but other than that offer no help. For the typical person that whole font list would be better off removed entirely (and yet it has always had such a high priority among the GUI settings).
But really, basic knowledge about Typography would help a great deal in creating decent looking content. A Serif title with Sans body-text for the web makes content easier to read, and the inverse is true for print.
For whatever it's worth, these conventions are largely unfounded.
With respect to readability or legibility alone, a majority of any research of a sans vs a serif has been weak or contradictory; you can't make a conclusion either way. These studies are often cited which continues to perpetuate the myth,
While I admittedly do prefer these conventions, they're largely arbitrary and shaped by historical precedent and evolved over time. For example, poor resolution screens were the primary reason to use serifs, yet I've heard plenty of questionable rationale for it over time
>> A Serif title with Sans body-text for the web makes content easier to read, and the inverse is true for print.
You are very correct. So, in a way, Microsoft got it all mixed up in the font selection thing mentioned above, no?
the inverse is true for print. i.e., Sans for header and Serif for body for print documents.
Now, re-read this: Microsoft did partly address that by making Cambria and Calibri its default header and body fonts (for Word)
Did they get it mixed up? I think so.
Personally, I think there is no point splitting hairs over whether they goofed up or whether it was intended... MS-Word as a product is intended for the "write it, and then print it" market (whether the actual printing happens or not is another thing altogether), and for that demographic, the typographic convention is Serif for body text and Sans (not a necessary condition, though) for heading [0]. And from that point of view, the design choice is mixed up. Right or Wrong, that was the only point I was trying to make.
[0] Again, I am aware that "is serif readable?" is a different can-of-worms altogether.
I.e., it's not the design choice that's wrong, but the assumptions about who Word is now intended for.
>> MS-Word as a product is intended for the "write it, and then print it" market (whether the actual printing happens or not is another thing altogether), and for that demographic, the typographic convention is Serif for body text
Same convention holds true for typesetting packages like Quark/InDesign/LaTeX, etc. The established convention for documents cranked out is what I mentioned earlier... So regardless of parent poster's/your opinions [0] on this topic, the choice is mixed up because body text ought to be Serif (and heading something else if needed).
[0] it's not the design choice that's wrong, but the assumptions about who Word is now intended for
And the evidence for this position is this design choice made by Microsoft. I'm treating it not as a mistake, but as part of proof that they've consciously chosen screen-viewing instead of printing as their goal, and applied that convention for their apps.
What evidence is there that the current MS Word is aimed at printing primarily, and because of that its "body text ought to be Serif" ? It has been aimed at printing a dozen years ago, sure, but why you're reasoning that it still is now?
Everything from movie posters(Drive,Flashdance), to asian restaurants and much more.
Amusingly, I think the same holds true of the typeface that sparked the whole thing: Time New Roman. Far too many people use it for far too much, sometimes in the wrong context. So maybe we should all use Times less too! (I tend to use Palatino or Garamond myself.)
I'm tired of seeing the same few fonts everywhere. For whatever reason Times and Comic Sans really stand out, but this really holds for all the "web-safe" fonts--which also happen to be the fonts everyone used to flock to in Microsoft Word.
Please consider branching out and using something else for your next document.