News for hackers. Stuff that matters.
Re:What Coke Contains by lostlogin on Saturday March 02, 2013 @03:55PM (#5310997)
>>The top of the can is then added. This is carefully engineered: it is made from aluminum, but it has to be thicker and stronger to withstand the pressure of the carbon dioxide gas.<<

Eh? The pressure is greater at the top of the can?

Re:What Coke Contains by kens on Saturday March 02, 2013 @07:27PM (#5311857)
The top needs to be thicker because of its geometry. The curved sides and domed base can resist pressure better than the flat top.

Another interesting fact is the can is narrower at the top to reduce the size of the lid, saving cost and mass.

Lots of details and photos on aluminum cans at http://www.chymist.com/Aluminum%20can.pdf so check it out.

Re:What Coke Contains by shabble on Saturday March 02, 2013 @05:36PM (#5311394)
It may also be a result of greater stiffness required for the captive pop-tab opener to work properly.

There's an interesting Slate article[1] about the complexity of what appears to be a such a simple feature; in order to achieve the force necessary to rupture the can opening, the tab pivot transitions between a first and second class lever. There's a good video somewhere showing the principles, but I can't seem to find it.

Returning to the 'pressure' argument, recall that most drinks cans have a domed bottom which provides comparatively greater strength than the flatter top.

[1] http://www.slate.com/articles/life/design/2012/09/can_tabs_h...

Re:What Coke Contains by izakage on Sunday March 03, 2013 @09:33AM (#5313837)
Here's a link to the mentioned video:

http://www.youtube.com/watch?v=ekv0kprA3AY

Re:What Coke Contains by rcamera on Saturday March 02, 2013 @04:29PM (#5311155)
Pressure is the same on both ends, and the bottom of the can is already thicker than the sides of it. The top of the can is thicker than the sides, but thinner than the bottom, because you need to be able to open the can easily. So in order to make it thinner than the bottom but at least as strong, you use a different alloy.
Re:What Coke Contains by Zenst on Saturday March 02, 2013 @04:16PM (#5311091)
Good point, though I suspect it is down to the ring pull being the weakest part by design of being able to open it along the indented outline of the tab. Though it could also be so possibly from the aspect of the carbon dioxide want to rise to the top and that extra force would only incure more pressure towards the top (assuming the can is upright). There again thats a bit of a wild guess, but the only plausable explanation I can find as to why that would be so. Or it could be wrong in some way and mixed the ring pull tab area as the weakest link and worded it to impley the whole top.

Though I do know with most certainty that if placed in a freezer and left then it will expand at the top and the bottom and mostly rupture a bit around the ring pull tab in the process.

Re:What Coke Contains by jacquesm on Sunday March 03, 2013 @10:03AM (#5313934)
> Though it could also be so possibly from the aspect of the carbon dioxide want to rise to the top and that extra force would only incure more pressure towards the top

Pressure inside an enclosed volume is equal everywhere.

Re:What Coke Contains by recuter on Saturday March 02, 2013 @04:18PM (#5311104)
I would guess this has more to do with the need to stack the cans than pressure internal to the can because of carbon dioxide. But it is just a guess.
Re:What Coke Contains by DanBC on Saturday March 02, 2013 @08:32PM (#5312067)
Thicker and stronger is about the pull-tab.

Smaller is about cost. They save a bit (say $3 per 1,000 as per link I posted elsewhere) by making the top 1/4 inch smaller.

Over 70 million cans a day that's some cash.