I'd be curious what filament you're using. the algorithm here is very much your slicer and how it's printed. The only other real variable I guess is the extruder on the printer and how fine it can print.
You mentioned a base/platform and a column.
I wonder how the column is designed and if that platform is supposed by a wall or any reinforcement.
maybe some of these links help:
You could cheat and do things like inserting other hardware while building something: https://www.youtube.com/watch?v=b1JfzW8GPZo
rounded corners and other design tips may improve quality of certain struts and orientation makes a difference: https://www.youtube.com/watch?v=wLBsO1UzIL0
also: https://www.youtube.com/watch?v=7aJ4dDyyf20
If you actually wanted to nerd out about material: https://www.youtube.com/watch?v=-ZPV-nVIIX4
I'm looking at this one thing I made that has a base and a platform and the platform is supported by a single column and the column is slowly bending. Surely I can make the column thicker or denser or use a different filament but it also just kinda looks stupid. Like I should have a cross brace or taper the column or idk what else a real engineer would do.