News for hackers. Stuff that matters.
Re:Claude Code and Codex reverse engineered my 1994 Jeep's E... by Gracana on Sunday November 15, 2026 @04:15PM (#50510835)
That's completely normal operation, the fuel pump runs continuously to pressurize the fuel rails and excess pressure is passed back to the tank by the regulator.
Re:Claude Code and Codex reverse engineered my 1994 Jeep's E... by rtaylorgarlock on Sunday November 15, 2026 @09:53PM (#50513447)
I obviously don't advise someone run a fuel pump at full bore on a system which has 1) reached pressure, 2) needs no flow, with 3) no record of replacing whatever pressure-managing diaphragm was managing fuel pressures in those days; simultaneously, if there's a pump to run continuously, i bet a 90s Jeep pump will do the trick. :)
Re:Claude Code and Codex reverse engineered my 1994 Jeep's E... by toast0 on Sunday November 15, 2026 @10:53PM (#50513810)
The system is designed for this...

The fuel pump runs at whatever PSI, and most of the fuel isn't used gets dumped by the regulator back into the tank.

I dunno abou 94 jeeps, but the fuel pump is probably not modulated, and the pressure regular may well be vacuum modulated... Running the engine hard, get more fuel pressure. If the diaphram fails, get fuel into the vacuum lines (oops).

As long as the regulator is dumping fuel to the return line, you're good. If flow stops, your fuel pump stops getting liquid cooling and the bearings probably wear out.

Re:Claude Code and Codex reverse engineered my 1994 Jeep's E... by KennyBlanken on Monday November 16, 2026 @04:04AM (#50515541)
The vast majority of fuel injected cars have a regulator that maintains the correct pressure and returns excess to the tank. Which is among other things necessary to keep the fuel in the fuel rail from getting really hot from engine heat.

You are very clearly wildly unqualified to be "advising" anyone on anything about cars.