News for hackers. Stuff that matters.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by amluto on Sunday November 15, 2026 @09:40AM (#50507253)
I was expecting to read this and learn that the display was reasonably engineered and that there is some small subset of people who have extreme PWM sensitivity who have problems. But no, Apple modulates at 240Hz, according to plenty of articles.

We’re no longer in the dark ages of flicker. There’s actual industry guidance: IEEE 1789. And 240Hz, at any respectable depth of modulation, does not meet the low-risk limit, let alone the no-observable-effect limit.

I am wondering whether this is actually just an amazing firmware goof: the reports seem to suggest that operating at full brightness mitigates the problem, which makes little sense for an OLED display. An OLED showing 50% (post-gamma) gray ought to drive the pixels the same way as an OLED at 50% brightness showing white. And this display supports HDR, so even 100% brightness white isn’t really 100%.

I’m wondering if a little engineering mistake snuck in: some (most?) LCD displays dim by PWM-dimming the backlight, and plenty of backlights have current-to-light transfer functions that inherently low-pass filter the light. If someone naively ported the same logic to an OLED (which doesn’t have a backlight), they might have implemented brightness controls by applying a 240Hz envelope to the pixel excitation waveform. This makes no sense at all as an actual implementation, but I can totally see an AI doing it and writing tests to validate it :)

Even if there is a genuine engineering factor that requires low frequency PWM, I bet Apple could mostly mitigate the problem by deliberately mismatching the phases. For decades, pre-LED stadium lights had rather extreme flicker at 120Hz, but it was tolerable because the overall system was engineered to roughly evenly split the lights between three electrical phases, giving an effective modulation depth near zero.

I haven’t seen one of these displays myself. I find 120Hz flicker to be extremely obvious and very very unpleasant, and if these displays really do modulate in a nasty way at 240Hz, I expect I’ll be able to see it, albeit rather less obviously than at 120Hz. Also, pretty much any modern phone can see this in slo-mo video mode :)

Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by formerly_proven on Sunday November 15, 2026 @09:57AM (#50507376)
The "99% brightness has flicker" thing seems like a gaffe, but the general approach is common for low brightness levels.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by amluto on Sunday November 15, 2026 @10:36AM (#50507710)
I did some digging, and apparently there are serious designs using this sort of hybrid dimming:

https://www.imec-int.com/en/articles/displays-health-patches...

Apparently brightness consistency between pixels is poor at low drive current, so designers often use a separate PWM envelope to compensate.

And there are even papers studying the choice of frequency, e.g.:

https://pubmed.ncbi.nlm.nih.gov/41411543/

Unsurprisingly, 240Hz is not actually recommended (at least that’s what I get from the abstract, and I’m not about to pay to read the rest of it).

Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by Exuma on Sunday November 15, 2026 @10:31AM (#50507666)
Wait... so operating at 100% brightness mitigates this? I bought this mac and have been reading about this. Stare at computer 15+ hours a day coding, but I also never use anything less than 100% brightness.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by vitaflo on Sunday November 15, 2026 @10:39AM (#50507736)
PWM is usually only used for dimming. So at 100% brightness there is no PWM being used. I'm not sure how this apple monitor works, but that's the basic gist for most screens that use PWM for dimming.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by w4der on Sunday November 15, 2026 @02:59PM (#50510124)
But the monitor specs show 1000 nits sustained and twice that as the peak, so that means that some PWM is required at 100% brightness, or peak brightness is somehow "over-driving" the panel?
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by amluto on Sunday November 15, 2026 @04:32PM (#50511018)
If it’s the “hybrid” design I mentioned later in the thread, then it could be that normal white is simply driving less than maximum current through the pixel regardless of the envelope duty cycle.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by j2j8 on Sunday November 15, 2026 @07:08PM (#50512343)
100% brightness isn't 100%. HDR images and video goes further than the 100% brightness setting.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by amluto on Sunday November 15, 2026 @10:54AM (#50507864)
If you have a modern-ish phone to go with that Mac, try taking a slo-mo video of your screen (preferably with content with decent sized patches of something other than black or dark gray) at different brightness settings. Maybe even make a big gradient and display that at various brightness settings.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by ShinyLeftPad on Sunday November 15, 2026 @06:39PM (#50512095)
Slomo is 240 fps. PWM is 240 Hz. how do you expect to see the flicker?
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by mrheosuper on Sunday November 15, 2026 @09:14PM (#50513213)
I believe this is the limit of the panel controller. The panel of the macbook is pretty high resolution, that means they need to scan really fast to reach the require refresh rate(120hz), then they have to scan even faster to do "pwm". The controller has to scan really, really fast.
Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by unconed on Monday November 16, 2026 @05:16AM (#50515975)
>We’re no longer in the dark ages of flicker. [IEEE 1789]

But we are still in the dark ages where industrial standards are not public.

Re:The MacBook Pro's OLED PWM Problem: When a 'Better' Displ... by orloffm on Monday November 16, 2026 @07:51AM (#50517079)
Some phones use the long pauses to fire the sensors behind the screen.