Re:Testing a Trash Can Faraday Cage
by superkuh on Saturday November 14, 2026 @12:23PM
(#50498795)
For those not in the know the nearfield is where the balance between the magnetic and electric component of the electromagnetic wave is not yet settled into an equilibrium. It's generally considered about 1/10th of wavelength around the emitter. For 100 MHz the can's walls are certainly near field though at 1.5 GHz nearfield is only ~2cm.
Light interactions are generally completely reciprocal and transmitting is the same as receiving. You can measure the properties of a system either by receiving or transmitting from two points and switch them around. There are some non-reciprocal mediums like arrangements of magnetic ferrites caused by zeeman splitting but that doesn't apply here.
But what does apply is that if the radio source were coming from a far field source like (~a km+ away, so tens of thousands of wavelengths) then it's electric and magnetic components would be in equilibrium when it hit the somewhat imperfect conducting surface of the can and then coupled through the seam in attenuated form. The stuff inside the can would then be exposed in the near field generated by that balanced far field wave coupling in.
This convolution of the balanced far field wave and the coupling through the imperfect seam is different than the convolution of an imbalanced EM wave generated inside in the near field and coupling out through the seam. It's hard to say if it'd be better or worse for the stuff inside though. I think this handwave can ignore the slight non-reciprocity.
Light interactions are generally completely reciprocal and transmitting is the same as receiving. You can measure the properties of a system either by receiving or transmitting from two points and switch them around. There are some non-reciprocal mediums like arrangements of magnetic ferrites caused by zeeman splitting but that doesn't apply here.
But what does apply is that if the radio source were coming from a far field source like (~a km+ away, so tens of thousands of wavelengths) then it's electric and magnetic components would be in equilibrium when it hit the somewhat imperfect conducting surface of the can and then coupled through the seam in attenuated form. The stuff inside the can would then be exposed in the near field generated by that balanced far field wave coupling in.
This convolution of the balanced far field wave and the coupling through the imperfect seam is different than the convolution of an imbalanced EM wave generated inside in the near field and coupling out through the seam. It's hard to say if it'd be better or worse for the stuff inside though. I think this handwave can ignore the slight non-reciprocity.