Re:The Raspberry Pi Education Manual
by Zuph on Thursday January 03, 2013 @07:52AM
(#5002101)
Not to burst your bubble, but Raspberry Pi IO pins operate at 3.3 volts, and the board you linked requires 5 volt logic inputs. It might still work, since there are no specs available for the transistor on the board, but don't count on it!
[ Parent
| on HN ]
The Raspberry Pi provides a 5V out pin at ~ 300 mA, so it should work, if the transistor works at 3.3V. Also, someone has tried it, and it worked. I just hope it's the same board.
FYI, It's ok to output at 3v3 volts to a 5v device if the device will still work, but don't read input from a 5v device or you might damage your Pi; the pins are wired directly to the Broadcom chip with no resistance.