Re:I stopped trusting USB-C cable labels and started testing...
by josephg on Friday August 07, 2026 @10:04AM
(#49210632)
That can be solved the same way it was solved for SD / CFe cards. Just have a single mark which guarantees a baseline set of requirements.
- "USB Speed 2" means [20gbps, thunderbolt 3, displayport, 20 watts].
- "USB Speed 3" means 100gbps, thunderbolt 4, etc.
- "Power 100" means 100 watts minimum.
Make a little logo for each standard - "S2" / "S3" / "P100" which can be branded onto each end of the cable. People who care can look at the logos and tell what a given cable can do.
Re:I stopped trusting USB-C cable labels and started testing...
by ProZsolt on Friday August 07, 2026 @04:25PM
(#49215790)
You mean something like this, which we have since 2021: https://learn.adafruit.com/understanding-usb-type-c-cable-ty...
Re:I stopped trusting USB-C cable labels and started testing...
by josephg on Saturday August 08, 2026 @02:24AM
(#49219342)
Yes, like that but something that actually gets used. And it'd be good to have a way to know how much power a cable supports too.
Thanks for the link. I didn't know those labels also tell you if a cable supports displayport alt mode and thunderbolt 3.
There are 6 different transfer speeds, from 480mbps to 120gbps.
There’s DisplayPort yes/no.
There are 4 thunderbolt genrations, each with its own marker.
Some of those are dependent (480mbps cables don’t have markers), so it’s not a full permutation problem. Only about 20 different combinations are valid.
Is the proposal to have 20 different physical connectors? Or to prune the space down to 6 or so by requiring all cables to be very thick, or to support higher transfer speeds than make any sense for a charging cable?
It’s not a leaky abstraction. It’s a physical interface standard that does not guarantee electrical properties. Same way you can plug a 6A cord and a 20A cord into the same electrical outlet.