News for hackers. Stuff that matters.
Re:Staples Announces In-Store 3D Printing Service by sawyer on Thursday November 29, 2012 @02:59PM (#4849919)
Minor nitpick with the title - the 3D printing will not be done in store (yet), it will be done offsite and shipped for pick up in store.
Re:Staples Announces In-Store 3D Printing Service by MichaelApproved on Thursday November 29, 2012 @03:59PM (#4850235)
I think it's more than a minor nitpick. The appeal of 3D printing is that you get the end result quickly.
Re:Staples Announces In-Store 3D Printing Service by njharman on Thursday November 29, 2012 @06:20PM (#4850909)
Yeah, totally. I can already order 3D printing and get it shipped to my doorstep. No drive to staples required.
Re:Staples Announces In-Store 3D Printing Service by biturd on Thursday November 29, 2012 @06:28PM (#4850932)
Maybe many of the people that shop at Stsples are not aware this technology even exists.

In my experience, at least in my locale, the shoppers ask for help finding a USB cable over an HDMI cable. If they are in Staples paying 10x the rate on a cable instead of at monoprice, this just might be something of a value add on.

What many don't know is that a few Staples offer a significant print shop on site. Yes, you can order 1000 rounded corner 4/4 business cards online for near free, or you can pay $90.00 at Staples. Some just haven't yet learned how to enter words into google yet. It's surprising actually. So surprising that LMGTFY is a huge whoosh!

Re:Staples Announces In-Store 3D Printing Service by hosh on Thursday November 29, 2012 @08:23PM (#4851373)
You don't have to drive to Staples. Apparently, they will deliver, much like their existing print services.

They are using a 3D printer that uses glued paper, rather than plastic. I don't know if Shapeway offers that. It'll be interesting to see what the pricing is, and what you can do with layered paper vs. plastic.

The important thing isn't whether you can get stuff 3D printed at Staples. The important thing is that we're nearing an inflection point for 3D printing the way mobile was when the iphone came out in 2007. Meaning, if you missed the elevator ride up with the smart phone, there's another ride coming around the corner.

Re:Staples Announces In-Store 3D Printing Service by bdickason on Friday November 30, 2012 @12:08AM (#4851949)
We don't currently offer the Mcor iris line at Shapeways. It actually just launched so I'm not sure if anyone does yet.

Our CEO was just at Euromold so he may have some insight as to whether or not we should look into the paper-based tech.

Re:Staples Announces In-Store 3D Printing Service by dhughes on Thursday November 29, 2012 @09:46PM (#4851578)
Or just buy the thing that you want printed in 3D.

Most times it's a small item such as a connector or some small thing, like a small part to fix your toilet.

Re:Staples Announces In-Store 3D Printing Service by randomdata on Thursday November 29, 2012 @04:20PM (#4850344)
Is there a technology that is as versatile and cost effective for small scale batches, but slower to finalize the product? The promise of 3D printing is appealing to me because it means I can start making things out of materials that I have thought to be previously out of my budget's reach.

Time is less of a concern from my point of view. If someone can create my one-off plastic model using, say, injection moulding for tens of dollars but it takes a month to get back to me, I'm cool with that. Does such a thing even exist though?

Re:Staples Announces In-Store 3D Printing Service by DanielStraight on Thursday November 29, 2012 @04:57PM (#4850510)
Not quite one-off, but you can get small runs of injected molded parts from Protomold:

http://www.protomold.com/

They also do machined parts on a smaller scale:

http://www.firstcut.com/

Re:Staples Announces In-Store 3D Printing Service by randomdata on Thursday November 29, 2012 @05:40PM (#4850725)
Though your fisrt link says it starts at $1495, compared to the $2 that some 3D printing services start at. You can build some pretty impressive things for under $100 with 3D tech. I'm not sure it is the same league. The second link might be a little closer though.
Re:Staples Announces In-Store 3D Printing Service by kapkapkap on Thursday November 29, 2012 @06:04PM (#4850839)
They two links are for the same company. The first link is for an injection MOLD. The mold can produce a few thousand parts at ~$1-$3/each. For 1,000-10,000 parts, ProtoMold is an great option.
Re:Staples Announces In-Store 3D Printing Service by randomdata on Thursday November 29, 2012 @06:07PM (#4850855)
Perhaps I didn't make myself clear in the original post. I'm interested in one-off pieces that I can design to solve problems around the house and if it takes a month to wait for that, no big deal. I don't need thousands of pieces.

The parent to my original post suggested there was something akin to 3D printing out there in terms of cost and versatility that was just slower to produce. Something designed for mass production certainly isn't it.

Re:Staples Announces In-Store 3D Printing Service by 001sky on Thursday November 29, 2012 @10:52PM (#4851746)
I'm interested in one-off pieces that I can design to solve problems around the house and if it takes a month to wait for that, no big deal

This does not seem like a big market, though. Exlcuding perhaps interior decoration. The engineering properties of 3d printed items for DIY are still TBD (lots of plastic cracking complaints, glued paper doesn't seem much better in terms of field-use). Also, in practice waiting 30 days for a DIY prototype is unlikely to be acceptable (serial project workflows & all that). small batch CNC will get you access to metal. Access to ABS does not seem all that special. Is there something in mind you have (like a project?) or is this all just theoretical?

Re:Staples Announces In-Store 3D Printing Service by randomdata on Friday November 30, 2012 @01:25AM (#4852119)
Like I said, I was just interested to know what other technologies are directly competing with 3D for one-off builds that can produce the same result (in terms of cost, function, etc.), but have the downside of being slower to produce as suggested by the poster before me.
Re:Staples Announces In-Store 3D Printing Service by 001sky on Friday November 30, 2012 @02:54AM (#4852322)
The slower/faster thing is really more an issue about iteration and time to market for projects. Project costs are a function of overhead--in addition to piece-cost. Overhead is a function of speed and thus project cost is a function of speed. This cost is/can be an order of magnitude larger than the unit-piece-cost. In other words, if you relax the speed constraint you implicitly relax the cost constraint, at least in a normal context. But these tradeoffs (and choices) depend on understanding a project's scope/spec. You are high-light at least one edge case, though: the home DIY, where time is no value but unit cost is paramount. In this case 3D printing might be a good idea, provided your project is suited to such an ouput.
Re:Staples Announces In-Store 3D Printing Service by wtvanhest on Thursday November 29, 2012 @03:54PM (#4850212)
Good catch, that is a major point to me. There is still no reason for them to have stores as a business. They are basically a direct competitor with XYZ internet 3D printer.

If they have any success at all, it is meaningless to their bottom line because Amazon and everyone else will be joining in.

[Edit] [Deleted]: "only less convenient since you need to go to the store to pick it up instead of it just being on your door when you get home."

Re:Staples Announces In-Store 3D Printing Service by anigbrowl on Thursday November 29, 2012 @04:19PM (#4850338)
Wrong for 3 reasons, I think:

1. in-person help and advice from store associates.

2. Established supplier for many businesses, which means employees can start using it without having to go through the vendor approval process. It's much easier to dip into an existing corporate budget for some new project than to create a budget for it.

3. First mover advantage. It would be better again if they had it in the actual stores, but I bet that's coming in larger markets.

Re:Staples Announces In-Store 3D Printing Service by wtvanhest on Thursday November 29, 2012 @05:01PM (#4850528)
I like the way you phrased this: "Wrong for 3 reasons, I think:"

Here is my counter argument for what it is worth.

1. in-person help and advice from store associates. Someone below pointed out that you may be overestimating in store associates. I'm not sure eitherway, but what I do know is that the printing will be done offsight and I would rather deal with a specialist over the web than someone who does some 3D printing, and sells regular printers etc. for my product.

2. Established supplier for many businesses, which means employees can start using it without having to go through the vendor approval process. It's much easier to dip into an existing corporate budget for some new project than to create a budget for it.

This is a great point and I could definitely see some value coming from the fact that I could just give my admin a part number for a 3D print rather than go through a ton of work getting a vendor approved.

3. First mover advantage. It would be better again if they had it in the actual stores, but I bet that's coming in larger markets.

Almost never in the history of business has a first mover advantage been a real advantage. I say almost because there was a previous discussion where someone mentioned 2 or 3 big companies that have done it, but the other 497 fortune 500 companies were copying someone else.

Re:Staples Announces In-Store 3D Printing Service by anigbrowl on Thursday November 29, 2012 @06:24PM (#4850922)
:-)

1. I agree that the in-store staff won't be expert. But as long as they're half-way competent, that will be a big help for people who are brand-new to the technology but don't know where to start. I think this will improve over time, but I may be biased; I have this theory that we're moving away from retail being totally unskilled and that brick & mortar suppliers will start competing by improving service, because that's one area where their online competitors are weak.

2. This should have been point #1 really.

3. I think the internet is pushing things that way, insofar as one can't easily afford to let someone else establish themselves as the market leader: http://en.wikipedia.org/wiki/Superstar#Economics_of_.22super...

Now I'm not at all sure Staples will end up as the market leader in 3d printing, but it may be sufficient for them to simply beat out competitors like Office Depot and become the leader in their market segment.

Re:Staples Announces In-Store 3D Printing Service by stevewilhelm on Thursday November 29, 2012 @04:31PM (#4850389)
> 1. in-person help and advice from store associates.

I think you are overestimating the skill level of the average Staples employee.

Re:Staples Announces In-Store 3D Printing Service by Evbn on Saturday December 01, 2012 @10:42PM (#4859984)
I think you are overestimating the skill level of the average Staples customer.
Re:Staples Announces In-Store 3D Printing Service by shardling on Thursday November 29, 2012 @04:17PM (#4850332)
The article specifically mentions home delivery as an option.
Re:Staples Announces In-Store 3D Printing Service by rmason on Thursday November 29, 2012 @03:53PM (#4850204)
If you want to rapidly iterate on a design this simply isn't going to work. Waiting a day between versions greatly limits the usefulness of this service.
Re:Staples Announces In-Store 3D Printing Service by mmcdan on Thursday November 29, 2012 @04:03PM (#4850264)
It's all about perspective. 1day turnaround is very slow for software but extremely fast for hardware. In the harware world, high-quality parts turnaround in 1 day is revolutionary.
Re:Staples Announces In-Store 3D Printing Service by anigbrowl on Thursday November 29, 2012 @04:22PM (#4850350)
If you need to rapidly iterate that badly, then you're probably going to buy a 3d printer for your business. Not everyone requires this.
Re:Staples Announces In-Store 3D Printing Service by nickpinkston on Thursday November 29, 2012 @05:28PM (#4850666)
Oh interesting - good catch!
Re:Staples Announces In-Store 3D Printing Service by rorrr on Thursday November 29, 2012 @03:53PM (#4850206)
This makes little sense. Ordering a 3D model online is easier, they ship it to your door (and it's probably cheaper).
Re:Staples Announces In-Store 3D Printing Service by hrabago on Thursday November 29, 2012 @03:59PM (#4850233)
However this does make the service that much more visible. I'm not sure that 3D printing is that well known yet. Also, dealing with a B&M establishment provides some with additional assurances that they may not have with an online-only business.
Re:Staples Announces In-Store 3D Printing Service by mmcdan on Thursday November 29, 2012 @04:11PM (#4850295)
I would argue the exact opposite. Online printing turnaround time is slower, costs more(for printing in batches), and is inconvenient when UPS/Fedex keep leaving "sorry we missed you" notices because you're at work.
Re:Staples Announces In-Store 3D Printing Service by rorrr on Thursday November 29, 2012 @04:15PM (#4850315)
As opposed to what? Staples doing the same, but then you have to go pick it up.
Re:Staples Announces In-Store 3D Printing Service by sophacles on Thursday November 29, 2012 @04:24PM (#4850355)
In-store pickup is nice in that once it's there, it's there. You can just go grab it at your convenience, instead of dealing with the "can only pickup during this small window" thing UPS does.
Re:Staples Announces In-Store 3D Printing Service by rorrr on Thursday November 29, 2012 @11:21PM (#4851823)
Huh? UPS delivers to my door.
Re:Staples Announces In-Store 3D Printing Service by sophacles on Friday November 30, 2012 @12:27AM (#4851996)
Wierd. UPS Delivers to my door only when I am at work. Then, if I don't want to/can't take time off, they tell me I must pick it up between 7 and 9 pm, as those are the only acceptable times, unless I call and arrange a pickup at the office instead of a delivery. If I am really lucky, when I call and arrange for a pickup, they will actually keep it in the office, and won't send it out on the next day's truck. After 3 attempts at this, they return it to sender.

I guess you don't live somewhere interesting and/or don't leave the house.

Re:Staples Announces In-Store 3D Printing Service by Avenger42 on Friday November 30, 2012 @11:04AM (#4853771)
UPS delivers to my door too - but they literally drop it there, ring the doorbell and leave.

If it's raining, the package gets soaked.

If the neighborhood kids are particularly rowdy, my package is gone when I get home.

Dropping it off at a specific location and requiring me to show up and prove my identity before I can take it home fixes these issues, among others.

Re:Staples Announces In-Store 3D Printing Service by Evbn on Saturday December 01, 2012 @10:41PM (#4859982)
BufferBox will solve this problem.