News for hackers. Stuff that matters.
Re:Arduino DUE (32 bit) Now Available by jrockway on Monday October 22, 2012 @12:40PM (#4683996)
You might also consider a STM32F4DISCOVERY board:

http://www.st.com/internet/evalboard/product/252419.jsp

This is also a ARM Cortex board but it's $15 and in stock everywhere. (I think it's more powerful and has more features than the Due, but I haven't checked in detail. At $15, though, it can't be beat. And there are less powerful boards in the series that are even cheaper!)

Re:Arduino DUE (32 bit) Now Available by tomkinstinch on Monday October 22, 2012 @01:03PM (#4684122)
I'll second the STM32 series of microcontrollers. We're using an STM32F100 chip for instrument control, and it was easy to include it on a custom PCB. It has many timers, and the performance per watt-dollar is amazing (as it is with any ARM chip). The STM32 series can be programmed with the gcc toolchain, or a number of commercial compilers (Keil, etc.). I've taken to using MikroE's compiler: http://www.mikroe.com/mikroc/arm/

Another alternative would be TI's Stellaris line. They have an inexpensive "launchpad" dev board: http://www.ti.com/ww/en/launchpad/stellaris_head.html?DCMP=s...

The downside to both of these is that they lack the ecosystem that makes Arduino magical.

Before the Due, the Maple board came out to provide an ARM board for the Arduino software: http://leaflabs.com/devices/maple/

As a side note, if anyone has experience working with the wireless version of the STM32 (the STM32W), I'd love to hear from you. I'm considering it for another product, but don't want to bother if there are serious problems or if the RF side doesn't work well.

Re:Arduino DUE (32 bit) Now Available by ChuckMcM on Monday October 22, 2012 @02:07PM (#4684436)
Came to say something similar. We've not really felt the impact that ARM is going to make in this space yet but its here.

It is fascinating to see what the various ARM chip makers have included (or not) on their chips and how. The ST Micro guys seem to 'get' that a lot of RAM is a good thing for prototyping. I've got one of their Butterfly boards (STM32F4DISCOVERY [1]) and the 192K of RAM is nice for doing development work. It doesn't have the Arduino software stack though.

The Stellaris parts seem a bit more resource constrained (I've got one of those too :-) Basically there are a number of different ARM parts that make for easy to use, inexpensive, embedded systems.

On the Due I'm glad they brought out the JTAG connector because you can get a nice JTAG debugging pod (SAM-ICE) which is a relabeled Segger pod for not much money. Getting debug support on something other than windows for some of the other parts is a bit dicey.

[1] http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL...

Re:Arduino DUE (32 bit) Now Available by lgeek on Monday October 22, 2012 @02:08PM (#4684451)
I'll second this recommandation. This kit became is my go-to choice for prototyping more complex microcontroller projects. Plenty of peripherals, flexible pin muxing, good documentation and the ARM core is quite fast. Finally, I almost forgot about the open source HW debugger to GDB bridge[0].

I actually wrote a set of drivers, libraries and a build system to allow easy prototyping (like Arduino) but also enable access to the more complex features of the SoC.

[0] https://github.com/texane/stlink

Re:Arduino DUE (32 bit) Now Available by anigbrowl on Monday October 22, 2012 @01:57PM (#4684367)
I've been looking at several uCs, in particular the Cypress Semi PSoC5 system for the system-on-chip functionality and the great toolchain, but also the very cheap TI Stellaris series. But there are so many highly capable products out there these days, it's hard to know which one is the best; I feel like a first-time computer buyer trying to choose between Mac and Windows without really knowing much about either.

Are there any resources you'd recommend for people trying to choose their development platform? I have specific reasons for liking the cypress system-on-chips (massive i/o, extensive software config capabilities, toolchain support for my intended application of audio/MIDI), but it's hard to size up all the different options.

Re:Arduino DUE (32 bit) Now Available by jrockway on Monday October 22, 2012 @02:56PM (#4684812)
I'd just say: try them. I learned microcontrollers with Basic stamps (many years ago), bought a Teensy a few years ago and learned AVR (avoiding Arduino for various reasons), and am now learning the STM ARM stuff.

My biggest takeaway is that teaching hardware people about unit tests would make humanity as a whole about 93% more productive :)

Re:Arduino DUE (32 bit) Now Available by StringyBob on Monday October 22, 2012 @05:08PM (#4685548)
While we are on eval suggestions - MBED [1] has always sounded interesting to me - primarily because of the concept of a collaborative web-based compiler that works from anywhere.

Seems aimed at prototyping and ease of use for non-hardware developers (who are familiar with C/C++) , but looks like there is a straightforward route towards mass production just using the microcontroller if required.

[1] http://mbed.org/

Re:Arduino DUE (32 bit) Now Available by mdda on Monday October 22, 2012 @04:09PM (#4685251)
Sorry to tag on to your comment with a separate thread - but what do you make of the "Freedom Board" [1]? (Cortex-M0+ MCU with 128KB flash, 16KB SRAM, up to 48MHz operation, $13 in stock)

[1] http://www.element14.com/community/community/knode/dev_platf...

Re:Arduino DUE (32 bit) Now Available by jrockway on Monday October 22, 2012 @05:08PM (#4685544)
Looks less powerful but has a "touch slider". For $13 just try it and see, right? :)