News for hackers. Stuff that matters.
Re:AV1 – Now Powering 30% of Netflix Streaming by ls612 on Thursday December 04, 2025 @08:12PM (#46155673)
On a related note, why are release groups not putting out AV1 WEB-DLs? Most 4K stuff is h265 now but if AV1 is supplied without re-encoding surely that would be better?
Re:AV1 – Now Powering 30% of Netflix Streaming by Dwedit on Thursday December 04, 2025 @08:28PM (#46155781)
Because pirates are unaffected by the patent situation with H.265.
Re:AV1 – Now Powering 30% of Netflix Streaming by ls612 on Thursday December 04, 2025 @08:30PM (#46155800)
But isn’t AV1 just better than h.265 now regardless of the patents? The only downside is limited compatibility.
Re:AV1 – Now Powering 30% of Netflix Streaming by bubblethink on Thursday December 04, 2025 @10:33PM (#46156589)
HW support for av1 is still behind h265. There's a lot of 5-10 year old hw that can play h265 but not av1. Second, there is also a split bw Dovi and HDR(+). Is av1 + Dovi a thing? Blu rays are obviously h265. Overall, h265 is the common denominator for all UHD content.
Re:AV1 – Now Powering 30% of Netflix Streaming by HelloUsername on Friday December 05, 2025 @02:55AM (#46157823)
> Blu rays are obviously h265

Most new UHD, yes, but otherwise BRD primarily use h264/avc

Re:AV1 – Now Powering 30% of Netflix Streaming by BlaDeKke on Thursday December 04, 2025 @08:52PM (#46155968)
Encoding my 40TB library to AV1 with software encoding without losing quality would take more then a year of not multiple years, consume lots of power while doing this, to save a little bit of storage. Granted, after a year of non stop encoding I would save a few TB of space. But it think it is cheaper to buy a new 20TB hard drive than the electricity used for the encoding.
Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Thursday December 04, 2025 @09:23PM (#46156157)
I avoid av1 downloads when possible because I don’t want to have to figure out how to disable film grain synthesis and then deal with whatever damage that causes to apparent quality on a video that was encoded with it in mind. Like I just don’t want any encoding that supports that, if I can stay away from it.
Re:AV1 – Now Powering 30% of Netflix Streaming by coppsilgold on Thursday December 04, 2025 @09:56PM (#46156383)
In MPV it's just "F1 vf toggle format:film-grain=no" in the input config. And I prefer AV1 because of this, almost everything looks better without that noise.

You can also include "vf=format:film-grain=no" in the config itself to start with no film grain by default.

Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Thursday December 04, 2025 @10:16PM (#46156493)
I watch almost everything in Infuse on Apple TV or in my browser, though.
Re:AV1 – Now Powering 30% of Netflix Streaming by adgjlsfhk1 on Thursday December 04, 2025 @09:58PM (#46156391)
What's wrong with film grain synthesis? Most film grain in modern films is "fake" anyway (The modern VFX pipeline first removes grain, then adds effects, and lastly re-adds fake grain), so instead of forcing the codec to try to compress lots of noise (and end up blurring lots of it away), we can just have the codec encode the noisless version and put the noise on after.
Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Thursday December 04, 2025 @10:20PM (#46156513)
I watch a lot of stuff from the first 110ish years of cinema. For the most recent 25, and especially 15… yeah I dunno, maybe, but easier to just avoid it.

I do sometimes end up with av1 for streaming-only stuff, but most of that looks like shit anyway, so some (more) digital smudging isn’t going to make it much worse.

Re:AV1 – Now Powering 30% of Netflix Streaming by adgjlsfhk1 on Thursday December 04, 2025 @11:03PM (#46156729)
Even for pre-digital era movies, you want film grain. You just want it done right (which not many places do to be fair).

The problem you see with AV1 streaming isn't the film grain synthesis; it's the bitrate. Netflix is using film grain synthesis to save bandwidth (e.g. 2-5mbps for 1080p, ~20mbps for 4k), 4k bluray is closer to 100mbps.

If the AV1+FGS is given anywhere close to comparable bitrate to other codecs (especially if it's encoding from a non-compressed source like a high res film scan), it will absolutely demolish a codec that doesn't have FGS on both bitrate and detail. The tech is just getting a bad rap because Netflix is aiming for minimal cost to deliver good enough rather than maximal quality.

Re:AV1 – Now Powering 30% of Netflix Streaming by Wowfunhappy on Thursday December 04, 2025 @10:01PM (#46156414)
With HEVC you just don't have the option to disable film grain because it's burned into the video stream.
Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Thursday December 04, 2025 @10:14PM (#46156486)
I’m not looking to disable film grain, if it’s part of the source.
Re:AV1 – Now Powering 30% of Netflix Streaming by Mashimo on Friday December 05, 2025 @02:10AM (#46157608)
Does AV1 add it if it's not part of the source?
Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Friday December 05, 2025 @07:53AM (#46160617)
I dunno, but if there is grain in the source it may erase it (discarding information) then invent new grain (noise) later.
Re:AV1 – Now Powering 30% of Netflix Streaming by Wowfunhappy on Friday December 05, 2025 @09:45AM (#46161964)
I'm skeptical of this (I think they avoid adding grain to the AV1 stream which they add to the other streams--of course all grain is artificial in modern times), but even if true--like, all grain is noise! It's random noise from the sensor. There's nothing magical about it.
Re:AV1 – Now Powering 30% of Netflix Streaming by phantasmish on Friday December 05, 2025 @10:43AM (#46162778)
The grain’s got randomness because distribution and size of grains is random, but it’s not noise, it’s the “resolution limit” (if you will) of the picture itself. The whole picture is grain. The film is grain. Displaying that is accurately displaying the picture. Erasing it for compression’s sake is tossing out information, and adding it back later is just an effect to add noise.

I’m ok with that for things where I don’t care that much about how it looks (do I give a shit if I lose just a little detail on Happy Gilmore? Probably not) and agree that faking the grain probably gets you a closer look to the original if you’re gonna erase the grain for better compression, but if I want actual high quality for a film source then faked grain is no good, since if you’re having to fake it you definitely already sacrificed a lot of picture quality (because, again, the grain is the picture, you only get rid of it by discarding information from the picture)

Re:AV1 – Now Powering 30% of Netflix Streaming by Wowfunhappy on Friday December 05, 2025 @03:46PM (#46167062)
If you’re watching something from the 70s, sure. I would hope synthesized grain isn’t being used in this case.

But for anything modern, the film grain was likely added during post-production. So it really is just random noise, and there’s no reason it can’t be recreated (much more efficiently) on the client-side.

Re:AV1 – Now Powering 30% of Netflix Streaming by homebrewer on Friday December 05, 2025 @01:29AM (#46157423)
Everyone is affected by that mess, did you miss the recent news about Dell and HP dropping HEVC support in hardware they have already shipped? Encoders might not care about legal purity of the encoding process, but they do have to care about how it's going to be decoded. I like using proper software to view my videos, but it's a rarity afaik.
Re:AV1 – Now Powering 30% of Netflix Streaming by avidiax on Thursday December 04, 2025 @08:29PM (#46155793)
I looked into this before, and the short answer is that release groups would be allowed to release in AV1, but the market seems to prefer H264 and H265 because of compatibility and release speed. Encoding AV1 to an archival quality takes too long, reduces playback compatibility, and doesn't save that much space.

There also are no scene rules for AV1, only for H265 [1]

[1] https://scenerules.org/html/2020_X265.html

Re:AV1 – Now Powering 30% of Netflix Streaming by aidenn0 on Thursday December 04, 2025 @10:11PM (#46156477)
I'm surprised it took so long for CRF to dethrone 2-pass. We used to use 2-pass primarily so that files could be made to fit on CDs.
Re:AV1 – Now Powering 30% of Netflix Streaming by breve on Thursday December 04, 2025 @09:43PM (#46156292)
> Encoding AV1 to an archival quality takes too long

With the SVT-AV1 encoder you can achieve better quality in less time versus the x265 encoder. You just have to use the right presets. See the encoding results section:

https://www.spiedigitallibrary.org/conference-proceedings-of...

Re:AV1 – Now Powering 30% of Netflix Streaming by dd_xplore on Friday December 05, 2025 @01:19AM (#46157351)
Yeah, is there any good(and simple)guide for SVT-AV1 settings? I tried to convert many of my stuff to it but you really need to put a lot of time to figure out the correct settings for your media, and it becomes more difficult if your media is in mixed formats, encodings etc.
Re:AV1 – Now Powering 30% of Netflix Streaming by Drybones on Friday December 05, 2025 @04:23AM (#46158830)
I do a lot of AV1 encoding. Here's a couple of guides for encoding with SVT-AV1 from enthusiast encoding groups:

https://wiki.x266.mov/docs/encoders/SVT-AV1

https://jaded-encoding-thaumaturgy.github.io/JET-guide/maste...

Re:AV1 – Now Powering 30% of Netflix Streaming by ls612 on Thursday December 04, 2025 @08:32PM (#46155817)
Yeah I’m talking about web-dl though not a rip so there is no encoding necessary.
Re:AV1 – Now Powering 30% of Netflix Streaming by MaxL93 on Friday December 05, 2025 @03:20AM (#46158007)
AV1 is the king of ultra-low bitrates, but as you go higher — and not even that much higher — HEVC becomes just as good, if not more. Publicly-available AV1 encoders (still) have a tendency to over-flatten anything that is low-contrast enough, while x265 is much better at preserving visual energy.

This problem is only just now starting to get solved in SVT-AV1 with the addition of community-created psychovisual optimizations... features that x264 had over 15 years ago!

Re:AV1 – Now Powering 30% of Netflix Streaming by 01HNNWZ0MV43FF on Saturday December 06, 2025 @03:11AM (#46171558)
All those rules and I still can't get subtitles on many shows and movies
Re:AV1 – Now Powering 30% of Netflix Streaming by chrisfosterelli on Thursday December 04, 2025 @08:44PM (#46155904)
Player compatibility. Netflix can use AV1 and send it to the devices that support it while sending H265 to those that don't. A release group puts out AV1 and a good chunk of users start avoiding their releases because they can't figure out why it doesn't play (or plays poorly).
Re:AV1 – Now Powering 30% of Netflix Streaming by mrbluecoat on Thursday December 04, 2025 @09:53PM (#46156363)
h.264 has near-universal device support and almost no playback issues at the expensive of slightly larger file sizes. h.265 and av1 give you 10-bit 4K but playback on even modest laptops can become choppy or produce render artifacts. I tried all three, desperately wanting av1 to win but Jellyfin on a small streaming server just couldn't keep up.
Re:AV1 – Now Powering 30% of Netflix Streaming by aidenn0 on Thursday December 04, 2025 @10:07PM (#46156446)
I'm not in the scene anymore, but for my own personal encoding, at higher quality settings, AV1 (rav1e or SVT; AOM was crazy slow) doesn't significantly beat out x265 for most sources.

FGS makes a huge difference at moderately high bitrates for movies that are very grainy, but many people seem to really not want it for HQ sources (see sibling comments). With FGS off, it's hard to find any sources that benefit at bitrates that you will torrent rather than stream.

Re:AV1 – Now Powering 30% of Netflix Streaming by hapticmonkey on Friday December 05, 2025 @12:38AM (#46157146)
I've seen some on private sites. My guess is they are not popular enough yet. Or pirates are using specific hardware to bypass Widevine encryption (like an Nvidia Shield and burning keys periodically) that doesn't easily get the AV1 streams.
Re:AV1 – Now Powering 30% of Netflix Streaming by qingcharles on Friday December 05, 2025 @01:57AM (#46157543)
I'm seeing releases pop up on Pirate Bay with AV1 this year.
Re:AV1 – Now Powering 30% of Netflix Streaming by Drybones on Friday December 05, 2025 @04:30AM (#46158925)
Smaller PT sites usually allow it

Bigger PT sites with strict rules do not allow it yet and are actively discussing/debating it.Netflix Web-DLs being AV1 is definitely pushing that. The codec has to be a select-able option during upload.