News for hackers. Stuff that matters.
Re:PicoIDE – An open IDE/ATAPI drive emulator by userbinator on Monday November 17, 2025 @12:23AM (#45951038)
Personally I think the half-melted (literally) rough 3D-printed look is rather ugly, and would prefer a stamped steel plate --- like this (floppy emulator): https://lotharek.pl/productdetail.php?id=28
Re:PicoIDE – An open IDE/ATAPI drive emulator by polpo on Monday November 17, 2025 @12:43AM (#45951108)
A stamped steel plate is not possible at my planned price point. But one thing I will note is that this 3D printed front panel is only a prototype.
Re:PicoIDE – An open IDE/ATAPI drive emulator by marcosscriven on Monday November 17, 2025 @03:03AM (#45951692)
On the contrary, I think you’ve done a fantastic job with the enclosure. Far from looking “half melted”, you’ve made good use of the bed texture, and the design is top notch.
Re:PicoIDE – An open IDE/ATAPI drive emulator by Palomides on Monday November 17, 2025 @09:27AM (#45953841)
as an aside to anyone else reading this, laser cut and bent sheet metal has gotten pretty cheap and easy, I think you could have an okay (unpainted) tray/case like this made for maybe $5 to $10 at 100 units
Re:PicoIDE – An open IDE/ATAPI drive emulator by polpo on Monday November 17, 2025 @11:17AM (#45954972)
BTW I'm pretty well versed in getting laser cut and bent sheet metal made, both in China and via US-based providers like SendCutSend - my PicoIDE project uses a metal bracket. In fact when so many other projects were using 3D printed brackets, I decided that was not good enough and dove in and did the work to get nice brackets made affordably. It really elevates the project to a higher level of professionalism.

That being said, $5-$10 sounds about right (if maybe a little on the high side) for something the size of PicoIDE, but unfortunately that is too much for the price point I want to hit. Affordability is a major target for PicoIDE. And also, WiFi is a feature of the front panel and for that reason, metal is a no-go. The WiFi antenna is at the front of the device to give it the best chance of decent reception, so it needs to be plastic.

Re:PicoIDE – An open IDE/ATAPI drive emulator by Palomides on Monday November 17, 2025 @12:31PM (#45955827)
totally reasonable, the cost tradeoffs on these types of products seems very challenging
Re:PicoIDE – An open IDE/ATAPI drive emulator by marcosscriven on Monday November 17, 2025 @10:12AM (#45954269)
Where, out of interest?
Re:PicoIDE – An open IDE/ATAPI drive emulator by marcosscriven on Monday November 17, 2025 @03:06AM (#45951706)
The one you linked looks ugly. Horrible seams, odd and too-long red buttons, unaligned slots.