News for hackers. Stuff that matters.
Re:How to Assemble an Electric Heating Element from Scratch by amelius on Sunday October 19, 2025 @10:38AM (#45634466)
No short-circuit protection?

[Also, I don't like the quality of the images. How can I take their advice seriously if the images are barely viewable. It looks like someone actually made an effort to reduce the quality of the images. For artistic effect, probably. Don't do that.]

Re:How to Assemble an Electric Heating Element from Scratch by teeray on Sunday October 19, 2025 @10:55AM (#45634617)
> It looks like someome actually made an effort to reduce the quality of the images. For artistic effect, probably.

They did, and it’s part of the footprint-reduction techniques used to host the site off solar full-time. https://github.com/lowtechmag/solar/wiki/Solar-Web-Design#im...

Re:How to Assemble an Electric Heating Element from Scratch by mysteria on Sunday October 19, 2025 @11:31AM (#45634922)
That's fine for the main article but I think there should be a way to get higher quality images should the reader request them. If power is a concern those can be hosted elsewhere.

I think it's acceptable for the drawings to be compressed this way but the photographs are very unclear.

Re:How to Assemble an Electric Heating Element from Scratch by AmosLightnin on Sunday October 19, 2025 @11:56AM (#45635151)
There is. Click the small pixely looking X at the end of the photo's caption.
Re:How to Assemble an Electric Heating Element from Scratch by mysteria on Sunday October 19, 2025 @04:28PM (#45637662)
I see. They should make it more obvious.
Re:How to Assemble an Electric Heating Element from Scratch by amelius on Sunday October 19, 2025 @11:15AM (#45634778)
I don't know, they are making electric heaters.

Might as well use your server to generate some of that heat ...

Re:How to Assemble an Electric Heating Element from Scratch by chuho on Sunday October 19, 2025 @10:53AM (#45634592)
Images aren't like that for artistic effect, but for lower energy consumption.

> We further apply default typefaces, dithered images, off-line reading options, and other tricks to lower energy use far below that of the average website.

https://solar.lowtechmagazine.com/about/the-solar-website/

Re:How to Assemble an Electric Heating Element from Scratch by amelius on Sunday October 19, 2025 @10:57AM (#45634629)
Ok, I didn't read that. But I still think it's _not_ a good idea to do that for a topic where personal safety is at stake. And besides, the quality is really too low anyway. I can barely recognize the thermocouples in those images.
Re:How to Assemble an Electric Heating Element from Scratch by aposm on Sunday October 19, 2025 @03:16PM (#45637037)
How can I take your comment seriously if you didn't read the article? It looks like someone didn't actually make an effort to understand the context of the images.
Re:How to Assemble an Electric Heating Element from Scratch by alwa on Sunday October 19, 2025 @04:08PM (#45637499)
I mean, to be fair, Low Tech Magazine doesn’t discuss their dithering habit within the primary article. GP linked to an “about” page elsewhere on their site—I’m not sure it’s reasonable to expect people to read artists’ process manifestoes as a precondition to forming aesthetic opinions about specific works.
Re:How to Assemble an Electric Heating Element from Scratch by creer on Sunday October 19, 2025 @02:27PM (#45636617)
At the bottom of the page:

Battery status 63%, not charging Power used 2.69W Uptime 5 weeks, 11 hours, 36 minutes

Traffic from HN may be a problem today...

Re:How to Assemble an Electric Heating Element from Scratch by polshaw on Monday October 20, 2025 @06:39AM (#45642366)
>Uptime 5 weeks, 1 day, 3 hours, 46 minutes

Seems to have had no issue whatsoever! Even through the whole night period. Shows the depth of inefficiency of our 'advanced' systems.

Re:How to Assemble an Electric Heating Element from Scratch by creer on Monday October 20, 2025 @08:43PM (#45651202)
> Battery status 44%

down from 63% yesterday but yeah, really good!

Re:How to Assemble an Electric Heating Element from Scratch by LooerCell on Sunday October 19, 2025 @10:52AM (#45634585)
About the quality of the images, it's on purpose:

> By dithering, we can make images ten times less resource-intensive, even though they are displayed much larger than on the old website.

This is needed because the website is solar-powered and self-hosted on low-tech hardware, read more here:

https://solar.lowtechmagazine.com/about/the-solar-website/

Re:How to Assemble an Electric Heating Element from Scratch by gblargg on Sunday October 19, 2025 @03:09PM (#45636985)
I just took the original first image from the article and compressed it to a 37k JPEG, the same size as the dithered image, and it looks a lot better. They must be considering resources to display the image, not just file size and network bandwidth.
Re:How to Assemble an Electric Heating Element from Scratch by quickthrowman on Sunday October 19, 2025 @12:32PM (#45635540)
> No short-circuit protection?

That’s the first thing I noticed too. You can buy a 277VAC/60VDC 7A DIN rail miniature circuit breaker that can handle 7,500 amps of fault current for $20 [0] there’s no excuse other than ignorance for the lack of overcurrent protection. I only know how to use a calculator to figure out AC fault current but that should be enough to handle a solar panel.

It does mention an optional thermal switch and optional thermal fuse, my sauna stove definitely has a thermal switch and I’d include one if I was building this thing too.

[0] https://www.digikey.com/en/products/detail/phoenix-contact/1...

Re:How to Assemble an Electric Heating Element from Scratch by amelius on Sunday October 19, 2025 @05:33PM (#45638222)
So glad someone responded to the main part of my comment.
Re:How to Assemble an Electric Heating Element from Scratch by quickthrowman on Sunday October 19, 2025 @05:51PM (#45638364)
I’m an electrical PM so the lack of overcurrent protection jumped out at me, I have to consider overcurrent protection for every single circuit I reason about, it’s mandatory and should be included in this installation.

The image part of your comment was nerd bait so everyone replied to that :P