News for hackers. Stuff that matters.
Re:The TTY Demystified by derleth on Wednesday September 19, 2012 @05:43PM (#4545726)
On the hardware level, does the VT 220 connect via a standard nine-pin serial port?
Re:The TTY Demystified by kps on Wednesday September 19, 2012 @09:10PM (#4546437)
"standard nine-pin serial port"

Them's fightin' words, boy.

DEC had a DE9 serial port connector whose pinout is not the same as the later IBM PC DE9 serial ports.

Re:The TTY Demystified by jasomill on Wednesday September 19, 2012 @07:27PM (#4546093)
IIRC, while the VT-220 had both 9-pin and 25-pin RS-232 ports, the 9-pin port was used to attach a printer. You also typically need a "null modem" adapter or cable to connect a terminal directly to a PC serial port (or USB serial adapter).

There's lots of original documentation for DEC VT series terminals here[1].

[1] http://www.vt100.net/

Re:The TTY Demystified by jff on Wednesday September 19, 2012 @05:52PM (#4545759)
It has a 25-pin serial port which converts to a 9-pin serial port by a simple passive converter (basically, just ditch 16 of the pins and route the others properly, you can actually do serial with just two wires). Same goes for the ADM-3a