Re:The TTY Demystified
by johncoltrane on Thursday September 20, 2012 @03:34AM
(#4547498)
I don't think it's implied anywhere that it's hard or novel. He simply is more connected than you, that's all.
On the hardware level, does the VT 220 connect via a standard nine-pin serial port?
"standard nine-pin serial port"
Them's fightin' words, boy.
DEC had a DE9 serial port connector whose pinout is not the same as the later IBM PC DE9 serial ports.
IIRC, while the VT-220 had both 9-pin and 25-pin RS-232 ports, the 9-pin port was used to attach a printer. You also typically need a "null modem" adapter or cable to connect a terminal directly to a PC serial port (or USB serial adapter).
There's lots of original documentation for DEC VT series terminals here[1].
It has a 25-pin serial port which converts to a 9-pin serial port by a simple passive converter (basically, just ditch 16 of the pins and route the others properly, you can actually do serial with just two wires). Same goes for the ADM-3a
I've done it with an ADM-3A from the 70s too, it's just. Not. That. Tough.
http://imgur.com/bRnST here's me, years back, hacking on a VT 220