News for hackers. Stuff that matters.
Re:Boeing has started working on a 737 MAX replacement by grepfru_it on Tuesday September 30, 2025 @07:04PM (#45432348)
Fun fact the 707 had the first implementation of “MCAS” because the plane had a tendency to pitch up in a certain flaps configuration. They added a stick nudger which applied light pressure in said config. Not a stick pusher, as it did not alert the pilots, it simply applied an extra input independent of the pilots. However this was made aware to all pilots of the plane and likely contributed to its certification.

Also the 707 tail was extended by 40ft to give it better minimum ground speed control, this was retroactively applied to already built planes. Very interesting to see how this was applied in the past with a lawyer at the helm vs the current ceo during the launch of the 737Max

Re:Boeing has started working on a 737 MAX replacement by quacksilver on Tuesday September 30, 2025 @07:48PM (#45432711)
Assume 40 inches rather than 40ft

Adding 12 meters to an aircraft is quite a big change.

Re:Boeing has started working on a 737 MAX replacement by grepfru_it on Tuesday September 30, 2025 @09:32PM (#45433374)
Mistake on my part they extended the tail to 40ft from 32ft
Re:Boeing has started working on a 737 MAX replacement by exidy on Wednesday October 01, 2025 @02:00AM (#45434740)
I think there might be some confusion here. The vertical stabiliser (not the tail) was extended by 40 inches [0] to combat concerns about poor yaw control.

Although the Wikipedia article cites the UK ARB as the influence, it was also in response to the 1959 crash [1] of a 707 being used for training, in which Dutch roll was induced and later became so violent it ripped 3 engines off the wings.

[0] https://en.wikipedia.org/wiki/Boeing_707#707-420

[1] https://en.wikipedia.org/wiki/1959_Washington_Boeing_707_cra...