Dirt keeps a constant temperature year round quite close to the surface that’s a ~60 degree difference between summer and winter in many areas. So 600c would just be a tradeoff between depth, heat loss, and thermal efficiency. However, what they aren’t saying is electricity > heat > electricity is quite lossy and even just using the heat directly is far less efficient than a winter heat pump.
More realistic end to end numbers are likely in the 30% range which means summer electricity needs to be vastly less valuable than winter energy before you nominally break even and start repaying the investment. Further you instantly lose all the electricity required to heat the mound up to working temperatures. IE: If you can only operate between 550C and 650C then going from 20C to 550C needs to happen before you can extract any energy and you don’t get that investment back. On the other hand if you’re a chemical plant that needs 200C things start looking a lot better.
A 10 ft pile of dirt (assuming 10 ft between heat exchanging pipes and the outside air) has an R value of 24 to 96, which is extremely significant.
I expect there would still be notable losses trying to keep it at 1100F indefinitely, but 10 ft of dirt will have insulation values approximating many feet of fiberglass insulation.
You’d want a very large mass to heat however, scaling matters a lot. You’d want the ratio of surface area to mass to be as small as possible, and that means as large a volume with as thermally dense a material as possible inside. Surface areas increases by the square, while volume increases by the cube.
Also, no matter what you do, you would eventually cook whatever was at the surface or underground, so don’t do this where you want trees - or where there are underground coal seams
Does the article describe how the heat gets from the mound to the houses or buildings it plans to heat, or factor in the cost of that?
Naively, I'd assume that would like 90% of the cost.
I know that physics is under no obligation to be intuitive, but it's also surprising to me that it's so easy to heat and keep dirt this temperature (600C / 1100F) throughout Winter, and I didn't see how that piece worked either, though I'm willing to assume that part is figured out and factored in.