and marketed to gullible Americans.
Not sure what you are trying to imply here. Products manufactured in China are of poor quality? iPhones are made in China and it would be a challenge to find any device with higher build quality than that. On the flip side, we all know how terrible the quality of US made cars is.
That said, thermometry is pretty easy and well understood and you don't need crazy accuracy for cooking, so 'low-end' is fine really, just don't pay high-price for it.
The thing is that there are lot of dollar stores in the West that want cheap shit for the paupers. And that is were the bad reputation comes from.
The number of times I've heard people complain about "cursed" M-M 3 prong AC power cables suggests that there is no amount of idiot-proof proofing that will keep a determined American safe from themselves.
You can find it here: https://www.thermoworks.com/12volt-ac-adapter/
It came with a power brick that I happened look at and noticed that the output voltage was listed simply as 12v (instead of all possible outputs like usbc bricks normally do). I hooked it up to a USB-PD breakout board I had and tested it. Sure enough, it output at 12v regardless of what is asked for.
Luckily, the device itself actually did USB-PD, so I was able to throw away that monstrosity before it fried anything. Annoyingly, the device only supported 12V, which is hot or miss on being supported by chargers, but at least a mismatch there isn't going to fry anything.
I’ve seen it on plenty of higher-end devices as well; and even worse.
The worst offender I’ve encountered is the TermoWorks Billows. ThermoWorks is a well established brand that makes high end thermometers and is considered one of the best on the market. So I was quite surprised to discover how their ‘Billows’ product is powered.
The device itself needs 12v and has a USB-C port for power. You’d think it would do USB-PD to negotiate it’s power needs so you can just use any old USB-C adapter. Not the case. It comes with a USB-A to USB-C cable and requires a special adapter with a USB-A port on it that puts 12v on the pins that normally supply 5v.
I have no idea how they came up with this abomination. Why even use USB-A connectors if it’s not going to work with a standard USB-A adapter, and why supply an adapter that’s basically going to kill most USB-A devices you plug into it? If you have a custom adapter anyway, why not just use a simple barrel connector? Why put a USB=C port on the device if it can’t use USB-PD?
I can imagine some Chinese ali-express product using such an abomination to save a few cents on components, but why would a well-respected brand like ThermoWorks ship such a thing? It boggles the mind.