I use a static HE (Hurricane Electric) IPv6 tunnel there, and it works great.
The only issue is that YouTube thinks the IPv6 block is commercial or an AI dev scraping their content, so I can't look at videos unless I'm logged in to YouTube.
Still, it let me tear down the HE IPv6 tunnel I was also running, since the sole reason I needed IPv6 was so our household game consoles could all play online without cursed firewall rules and IP reservations. I’m pretty chuffed with the present status quo, even if it’s far from perfect.
One other thing I’d note about OPs article (for folks considering it as a way to work around shitty ISP policies) is that once you have this up and running, you also have a perfect setup for a reverse proxy deployment for your public services. Just make sure you’re watching your bandwidth so you don’t get a surprise bill.
Ah, I see you also watched that video yesterday on manufacturing a tiny electric rotor.
IPv4 is getting CGNAT'd more and more, on the other hand. One national ISP basically lets you pick between IPv4 CGNAT and IPv6 support (with IPv6 being the default). Another has been rolling out CGNAT IPv4 for new customers (at first without even offering IPv6, took them a few months to correct that).
This isn't even an "America and Western Europe" thing. It's a "whatever batshit insane approach the local ISP took" thing. And it's not just affecting IPv6 either.
Even if you decide to try to make it a Frankenstein's monster of a protocol, making it a two IPv4 packets wrapped in each other to create a v4+v4=v8 address space, you'll need a whole new routing solution for the Internet, as those encapsulations would have issues with NATs. And that'll be way more error prone (and thus, less secure), because it'll be theoretically possible to accidentally mix up v4 and inner-half-of-v8 traffic.
Nah, if we can't get enough people to adopt IPv6, there's no chance we'll get even more people to adopt some other IPvX (unless something truly extraordinary happens that would trigger such adoption, of course).
There's no straightforward way of getting old hosts to be able to address anything in the new expanded space, or older routers to be able to route to it.
So you have to basically dual-stack it, and, oops, you've created the exact same situation with IPv6...
It also can't be backwards compatible with IPv4 networking and software. The network gear will drop extra address, the OS will ignore it, and software will blow up.
It would be much better to make a new version. But if going to make new protocol, might as well make the address big enough to not need expansion again.
Then you have to update every networking device to support the new standard. And update all the protocols (DHCP, etc) for more address space. That part is what took a lot of the time for IPv6. Then you have to update all of the software to support 64-bit addresses. Luckily, most of the work was already done for IPv6.
Then you have to support a transition mechanism to talk to IPv4. Except there isn't enough space in new address. IPv6 on the other hand, has enough address space to stuff the IPv4 host and port in the IPv6 address for stateless NAT.
> Where are you going to put the extra address bits in the IPv4 header?
The optional part. EIP proposed using 16 bits (minimum) to bump the address space to 40 bits (the EIP extension portion is variable-sized so it can go higher until you reach header option limits): https://archive.org/details/rfc1385/page/4/mode/2upAlso with the extra octet added we'd get ~254 current-IPv4-sized clusters of addresses. If a unit inside one of these doesn't really care about the others they can skip supplying this information entirely, i.e. not all participants need to understand the extension. LANs, internal networks and residential use comes to mind as examples in which case only the gateway has to be updated just like the RFC says.
With IPv6 participation is all or nothing or dual stack, but then this is ~1.1 stack :)
Unless you're planning on doing all IP communications in user space (or within your network "cluster"), the OS and IP stack still needs to be updated, you need a new addressing format, applications need to be aware of it, etc. If you want to actually make use of the new address space, it all needs to be updated... just like IPv6.
So no, good attempt but it's pretty much still a 'upgrade all the routers and switches' kind of issue just like IPv6.
I frequently see this claim made but it simply isn't true. NAT isn't inherent to a protocol it's something the user does on top of it. You can NAT IPv6 just fine there just isn't the same pressure to do so.
You can NAT IPv6 but it is rarely done since there is simply no need.
Your IPv8 is what IPv6 should have been. Instead, IPv6 decided to re-invent way too much, and is why we can't have nice things are are stuck with IPv4 and NAT. Just doubling the address width would have given us 90% of the benefit of V6 with far less complexity and would have been adopted much, much, much faster.
I just ported some (BSD) kernel code from V4 to V6. If the address width was just twice as big, and not 4x as big, a lot of the fugly stuff you have to deal with in C would never have happened. A sockaddr could have been expanded by 2 bytes to handle V6. There would not be all these oddball casts between V4/V6, and entirely different IP packet handling routines because of data size differences and differences in stuff like route and mac address lookup.
Another pet peeve of mine from my days working on hardware is IPv6 extension headers. There is no limit in the protocol to how many extension headers a packet can have. This makes verifying ASICS hard, and leads to very poor support for them. I remember when we were implementing them and we had a nice way to do it, we looked at what our competitors did. We found most of them just disabled any advanced features when more than 1 extension header was present.
The main disagreements have been above what to do with the new addresses e.g. some platforms insist on SLAAC. (Which is good because it forces your ISP to give you a /64).
Devices operating at the IP layer aren't allowed to care about extension headers other than hop-by-hop, which must be the first header for this reason. Breaking your stupid middlebox is considered a good thing because these middleboxes are constantly breaking everyone's connections.
Your sockaddr complaints WOULD apply at double address length on platforms other than your favorite one. The IETF shouldn't be in charge of making BSD's API slightly more convenient at the expense of literally everything else. And with addresses twice as long, they wouldn't be as effectively infinite. You'd still need to be assigned one from your ISP. They'd still probably only give you one, or worse, charge you based on your number of devices. You'd still probably have NAT.
There's nothing nicer than being able to BGP peer and just handle everything yourself. I really miss old Level 3 (before the Lumen/CenturyLink buyout).
Kind of kicking myself for selling my netblock but it was a decent amount of money ($6000).
What if I you will your netblock to me? I'll will you my camaro and my collection of amiga parts.
(I really want your netblock)
One of the biggest ISPs in my country has been promising IPv6 since 2016. Another, smaller, competitor, advertised on "World IPv6 Day" in 2011 that it was way ahead of the competition on supplying IPv6; but in fact does not supply it today.
One of the answers I see given a lot over the years is: Yes, I know that I could do this simply with IPv6. But ISPs around here don't route IPv6, or even formally provide statically-assigned IPv4 to non-business customers. So I have had to build this Heath Robinson contraption instead.