In US farm country it was common to fell the trees in late fall/early winter after the harvest was all taken care of and then leave the trees where they dropped until the ground froze. After the ground froze you haul them to the build site, much easier to drag logs on hard frozen ground than on soft wet ground. Then you would forget about them until after the spring planting is taken care of and build in the summer. Those big timbers would be far from dry but they will have lost a fair amount of weight and will be more stable which makes everything easier.
Even then, building a barn with dried pine or hemlock is much more tedious and incurs many more trips to the sharpening wheel. It is in no way easier.
Examples of things where green woodworking is common: spoon carving, bowl turning, chair making, etc.
The idea is that wood is worked while green to make 80% finished blanks, which are dried slowly for some months or years before finishing the rest of it. This gives less distortion to the shape as it dries. And the drying times are faster because it's all small pieces at that point. The time from tree to product is shorter.
It is an almost extinct craft but it is a lot of fun for woodworkers not under schedule pressure.
A green wood specialty in my neck of the woods is sauna ladles (used for throwing water). You can buy wooden ones but they are made from seasoned lumber with CNC machines and don't survive more than a year before they crack. The one I made from green wood is still going strong after 7 years in extreme humidity and temperature environment.
I've also had great results using silica gel on smaller items, although it can be hard to scale it to larger vessels. Much faster drying than air alone, with greatly reduced distortion and cracking.
This is particularly relevant in timberframing, where you want to work with the wood when it is as green as possible. Green pine, though heavier to lug around, is significantly more receptive to a chisel than drier lumber. In a classic mortise and tenon joint [0], it's common to leave the outer edge of the shoulder slightly raised from the inner edge to account for the natural warping as the exterior of the beam dries more aggressively.
Although it's more outside my area of experience, I believe fine carpentry also has a few techniques that see a higher frequency of use in areas that enjoy seasonal swings in humidity. The split-tenon is the only one that comes to mind, but, now that I think of it, I realize my mental model isn't great. More surface area to account for seasonal swelling / shrinkage? Maybe someone else can chime with a better explanation of this one.
[0] https://www.barnyard.com/sites/default/files/styles/full_pag...