> On the face of it, the idea makes sense.
Your specific example is a pure ratio so there's no problem with it (there is no reference). Apart from the fact that I have to guess whether you are measuring volts or watts through your cables, of course...
To have an actual amount of power, you need to reference it to some particular amount of power, like dBm for power-ratio-relative-to-milliwatt.
I'm not a sound engineer, so to check my understanding: would this not be the case for any other scale indicator?
If you have a cable that loses 4m and you're sending 6m into it, you'd not get 2m out?
(The m being milli here, as in millivolts or whatever unit would be useful here — leaving it unspecified to keep the comparison to dB as close as possible)
So the original example in linear units would be: We're reducing the signal by 63% in the this cable, and the gain through this amp is 199.5%, so the output is...
0.63 * 1.995 = 1.26
126% which is 20log10(1.26) db or around 2db.
-4 + 6 = 2 is a little easier to do.
As have been pointed out, it's just a power ratio on a logarithmic scale, but this has many benefits, the main one being that chaining gain/attenuation in a system is just a case of adding the db values together. 'We're loosing 4db in this cable, and the gain through this amp is 6db, so the output is 2db hotter than the input'. Talk to any sound engineer and you'll do this sort of thing successfully without necessarily understanding the science, so that's a massive win.