News for hackers. Stuff that matters.
Re:A M.2 HDMI capture card by doubled112 on Monday April 21, 2025 @06:54PM (#43757393)
The real PITA is when adding the NVMe disables the SATA ports you planned to use.
Re:A M.2 HDMI capture card by creatonez on Monday April 21, 2025 @10:38PM (#43758607)
Doesn't this usually only happen when you put an M.2 SATA drive in? I've never seen a motherboard manual have this caveat for actual NVMe M.2 drives. And encountering an M.2 SATA drive is quite rare.
Re:A M.2 HDMI capture card by ZekeSulastin on Tuesday April 22, 2025 @01:18AM (#43759261)
I have a spare-parts NAS on a Z170 (Intel 6k/7k) motherboard with 8 SATA ports and 2 NVME slots - if I put an x2 SSD in the top slot it would disable two ports, and if it was an x4 it would disable four! Luckily the bottom m2 slot doesn’t conflict with any SATA ports, just an expansion card slot. (The board supports SATA Express even - did anything actually use that?)

SATA ports are far scarcer these days though and there’s more PCIE bandwidth available anyways, so it’s not surprising that there aren’t conflicts as often anymore.

Re:A M.2 HDMI capture card by toast0 on Tuesday April 22, 2025 @01:56AM (#43759425)
Nope, for AM5, both of the available chipsets[1] have 4 serial ports that can be configured as x4 pci-e 3.0, 4x sata, or two and two. I think Intel does similar, but I haven't really kept up.

[1] A620 is cut down, but everything else is actually the same chip (or two)