News for hackers. Stuff that matters.
Re:Bayleaf · Building a low-profile wireless split keyboard by aredox on Tuesday March 04, 2025 @10:10AM (#43255667)
Nice write-up.

For something so thin, your soldering woes aren't surprising. The standard way to manage that would have been to solder everything in one go on a hot plate (reflow soldering).

https://www.youtube.com/watch?v=QarizoUnRfk

Re:Bayleaf · Building a low-profile wireless split keyboard by stronglikedan on Tuesday March 04, 2025 @10:25AM (#43255870)
> reflow soldering

one of the most satisfying things to watch

Re:Bayleaf · Building a low-profile wireless split keyboard by ghostly_s on Tuesday March 04, 2025 @01:20PM (#43258221)
This video features the exact same technique and hot plate that was used here.
Re:Bayleaf · Building a low-profile wireless split keyboard by sgraz on Wednesday March 05, 2025 @04:56AM (#43264802)
Thank you, My first few attempts were with a SMD stencil and a 50x50mm hotplate, it's true that maybe a larger hotplate that could span the whole PCB might have done a better job. But with the smaller plate it was "easier" to just manually apply solder paste and do 4 switches at a time.

I think this method is also highly specific to these switches. They are known for being difficult to solder with hobby-tier equipment.

Re:Bayleaf · Building a low-profile wireless split keyboard by shellfishgene on Wednesday March 05, 2025 @05:14AM (#43264899)
I just reflowed a board in a cheap cast iron pan filled with some sand on my induction stove. Worked fine!