Re:Nvidia's RTX 5090 power connectors are melting
by mschuster91 on Wednesday February 12, 2025 @07:28AM
(#43024681)
> It's not hard
It still is because in the end you're dealing with dozens of amps on the "high" voltage side and hundreds of amps on the "low" (GPU chip) voltage side. The slightest fuck-up can and will have disastrous consequences.
GPUs these days are on the edge of physics when it comes to supplying them with power.
Re:Nvidia's RTX 5090 power connectors are melting
by Dylan16807 on Wednesday February 12, 2025 @04:21PM
(#43029898)
Let me rephrase.
Doing the power conversion is hard.
Realizing that you already have several DC converters sharing the load, and deciding to power specific converters with specific pins, is comparatively easy. And the 3090 did it.
> Alternatively each 12VHPWR pair could get its own (!) DC-DC converter down to 1V2 or whatever the GPU chip actually needs, but again that also needs a bunch of associated circuitry.
So as you say, monitoring multiple inputs happened on the older xx90s, and most cards still do it. It's not hard.
Multiple DC-DC converters is something every GPU has. That's the only way to get enough current. So all you have to do is connect them to specific pins.