News for hackers. Stuff that matters.
Re:Phased Array Microphone by nielsole on Friday November 22, 2024 @03:54PM (#42217290)
Asahi Linux (and likely MacOS too) uses the resistance of the speakers coils to detect overheating of same speakers and reduces volume.
Re:Phased Array Microphone by derhuerst on Friday November 22, 2024 @06:58PM (#42218339)
Re:Phased Array Microphone by CamperBob2 on Friday November 22, 2024 @07:53PM (#42218528)
Interesting. If the voltage across the speaker voice coil can be sampled with enough sensitivity at a fast-enough rate, you have an undocumented microphone.
Re:Phased Array Microphone by xyzzy_plugh on Friday November 22, 2024 @07:59PM (#42218547)
This is true of all speakers
Re:Phased Array Microphone by CamperBob2 on Friday November 22, 2024 @08:38PM (#42218663)
Exactly.
Re:Phased Array Microphone by ssl-3 on Saturday November 23, 2024 @12:30AM (#42219369)
It's true of all dynamic speakers -- the sort with a voice coil and a magnet.

(But not all speakers are dynamic speakers.)

Re:Phased Array Microphone by planewave on Saturday November 23, 2024 @08:12AM (#42220685)
Would this also be true for electrostatic speakers as well? Though would probably would require greater gain/amplification or, potentially the application of some kind of bias voltage for the capacitive diaphragm of the speaker.

Just speculation based on the shared operating principal with condenser microphones

Re:Phased Array Microphone by ssl-3 on Saturday November 23, 2024 @11:31PM (#42225927)
With bias power, I think an electrostatic loudspeaker turns into a condenser microphone (a thing that provides varying capacitance in response to changes in pressure).

I don't think that electrostatic loudspeakers all require bias power, so it's not quite as simple as using a dynamic loudspeaker backwards is.

It is a neat idea, though. A big, flat-panel microphone would be interesting to play with.

Re:Phased Array Microphone by robotresearcher on Monday November 25, 2024 @02:55PM (#42239574)
You can use a window or any large panel as a microphone without even touching it by observing its vibrations.

You can bounce a laser off it, or even go fully passive using a camera with some sensitivity tricks: I recall a paper that reconstructed a remote conversation by watching a houseplant through a window.

Re:Phased Array Microphone by ssl-3 on Tuesday November 26, 2024 @03:01PM (#42249416)
Of course.

Everything is a microphone if you're brave enough.

Re:Phased Array Microphone by BobbyTables2 on Saturday November 23, 2024 @12:36AM (#42219391)
But not true of all codecs…

Do you think Apple put a hidden microphone in their devices by pure accident?

Re:Phased Array Microphone by TacticalCoder on Saturday November 23, 2024 @07:32PM (#42225045)
Others who know that better than me and commented but... First time I read that, as a kid, here was I plugging my headphones into the input jack of my parents' soundsystem and, sure enough, it worked as mic (although at as super ultra low volume but I clearly remember it worked).
Re:Phased Array Microphone by squarefoot on Friday November 22, 2024 @08:57PM (#42218707)
That's the same principle used by cheap solder stations to regulate the tip temperature without employing a thermal sensor: they measure the heater resistance, presumably during the off state of the PWM signal that drives the heater. In that case the measurement is less accurate than using a real sensor, still good enough for cheap solder stations where a few degrees don't make a big difference.
Re:Phased Array Microphone by floating-io on Saturday November 23, 2024 @06:13PM (#42224651)
Why would they do it during the off state? If they know the voltage and can measure the current that they're driving it with -- or vice versa -- they can use Ohm's law to calculate the resistance.

They'd probably have to do that anyway.

Re:Phased Array Microphone by nick3443 on Saturday November 23, 2024 @12:50AM (#42219423)
Also used in electric motor controllers to monitor winding temperature.