Hi, you can check out this: https://www.youtube.com/watch?v=qq2FRv0lCPw. I think it might be useful to you

This is great, thank you!

Neat! How can I help you? I think our devkit's components will help you get started. Here is the main.cpp code for this

``` /* * @file streams-i2s-webserver_wav.ino * * This sketch reads sound data from I2S. The result is provided as WAV stream which can be listened to in a Web Browser * * @author Phil Schatzmann * @copyright GPLv3 /

#include <WiFi.h> #include "AudioTools.h"

const char ssid = "<stavros_ssid>"; const char *password = "stavros_pw"; AudioWAVServer server(ssid, password);

I2SStream i2sStream; ConverterFillLeftAndRight<int16_t> filler(LeftIsEmpty); // fill both channels - or change to RightIsEmpty

void setup() { Serial.begin(115200); AudioLogger::instance().begin(Serial, AudioLogger::Info);

    //   // Connect to Wi-Fi
    Serial.println("Connecting to WiFi...");
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED)
    {
        delay(1000);
        Serial.println("Connecting...");
    }
    Serial.println("Connected to WiFi");

    // Print the IP address
    Serial.print("IP address: ");
    Serial.println(WiFi.localIP());

    // start i2s input with default configuration
    Serial.println("starting I2S...");
    auto config = i2sStream.defaultConfig(RX_MODE);

    // working well
    config.i2s_format = I2S_STD_FORMAT;
    config.sample_rate = 44100;  // INMP441 supports up to 44.1kHz
    config.channels = 1;         // INMP441 is mono
    config.bits_per_sample = 16; // INMP441 is a 24-bit ADC

    config.pin_ws = 19; // Adjust these pins according to your wiring
    config.pin_bck = 18;
    config.pin_data = 21;
    config.use_apll = true; // Try with APLL for better clock stability
    i2sStream.begin(config);
    Serial.println("I2S started");

    // start data sink
    server.begin(i2sStream, config, &filler);

}

// Arduino loop void loop() { // Handle new connections server.copy(); }

```

This code just listens to audio you record on a microphone (INMP441 MEMS microphone used here) and streams it to an endpoint of the microcontroller's IP address. If you would like more help on this give me a shout anytime. my email: akash at starmoon dot app

This is good, thanks! Now that I see this, I realize that I'd want wakeword detection as well, which is getting a bit far. I like what the Willow team did with their stack, unfortunately that project seems to have died. It was pretty ideal, otherwise...

I swear, every last bit of exchange from the "project developers" in this comment section, and all of the project repo, including the readme, is LLM-generated.

We are all LLM-generated