News for hackers. Stuff that matters.
Re:Inside a Ferroelectric RAM Chip by aidenn0 on Monday September 23, 2024 @06:34PM (#41631307)
Are the parts pin-compatible with parallel sram? I've always thought it would be nice to replace the battery-backed SRAM in old video game cartridges with MRAM or FeRAM
Re:Inside a Ferroelectric RAM Chip by kens on Monday September 23, 2024 @07:30PM (#41631659)
The FM1808B and FM1608B might work for you. These are 32Kx8 and 8K×8 FRAM chips with standard SRAM pinouts, in DIP packages. If you don't need a DIP, you have a lot more choices.
Re:Inside a Ferroelectric RAM Chip by aidenn0 on Monday September 23, 2024 @07:37PM (#41631691)
The SOIC look like they could work as-is in a gameboy, which (thanks to Pokemon) is the most common request for replacing batteries. The DIPs could be made to work in most NES games too, I suspect.
Re:Inside a Ferroelectric RAM Chip by polpo on Monday September 23, 2024 @08:20PM (#41631901)
I’ve replaced battery backed SRAM in several game consoles and other devices with FRAM (Neo Geo CD, Sega Saturn, an HP oscilloscope) and for some it’s drop-in, and in a few you have to bodge some lines.
Re:Inside a Ferroelectric RAM Chip by rbanffy on Tuesday September 24, 2024 @12:43AM (#41633154)
Won’t that negatively impact the life expectancy of the device? FRAM is rated for trillions of reads and, if the SRAM is frequently read, a trillion reads isn’t that much.
Re:Inside a Ferroelectric RAM Chip by formerly_proven on Tuesday September 24, 2024 @06:01AM (#41634910)
>100 trillion reads per location over 30 years still means you gotta read locations at over 100 kHz 24/7. Not good enough for main memory, sufficient even for frequently accessed configuration values.
Re:Inside a Ferroelectric RAM Chip by rbanffy on Friday September 27, 2024 @01:34PM (#41673396)
Definitely not for running code directly from it (unless it's shadowed to RAM), but for storing config data or checkpoints, it makes sense.
Re:Inside a Ferroelectric RAM Chip by seritools on Tuesday September 24, 2024 @09:19AM (#41636162)
I guess it depends on whether the game cartridges only use it for storing savegames, or as actual additional RAM.
Re:Inside a Ferroelectric RAM Chip by rbanffy on Friday September 27, 2024 @01:33PM (#41673385)
Yes. It'd be a problem for running code directly from it - it'd be better to cache it to DRAM so that all reads would come from DRAM and only writes would make it to FE-RAM.

IIRC, it was a common trick with 286 and 386 PCs, because BIOS ROMs were 8-bit wide and shadowing the BIOS in RAM made it much faster.