News for hackers. Stuff that matters.

A comment on The fanless heatsink: Silent, dust-immune, and almost ready for prime time.

Re:The fanless heatsink: Silent, dust-immune, and almost rea... by stevewilber on Monday June 25, 2012 @11:57AM (#4157084)
The video mentions that transferring heat to the impeller is a challenge, but it wasn't clear to me how they overcame this. Is the space between the CPU and the impeller so small that heat can be transferred efficiently?

If that is the case, I wonder how cheaply these could be produced given the incredibly tight clearance.

[ Parent | on HN ]
Re:The fanless heatsink: Silent, dust-immune, and almost rea... by thrownawayfan on Monday June 25, 2012 @12:04PM (#4157119)
There's a whitepaper available here http://prod.sandia.gov/techlib/access-control.cgi/2010/10025...

Their data suggests that the air gap provides minimal resistance to the flow of heat. As for the clearance, they've stated that unusually high-precision manufacturing is not required for the two surfaces.

[ Parent | on HN ]
Re:The fanless heatsink: Silent, dust-immune, and almost rea... by nialo on Monday June 25, 2012 @01:21PM (#4157503)
Re: clearance, while .001" clearance isn't something I'd want in a design particularly, modern machine tools are good enough that you get flatness and surface finish good enough to not have problems at .001" clearance basically free on any machined surface.
[ Parent | on HN ]
Re:The fanless heatsink: Silent, dust-immune, and almost rea... by excuse-me on Monday June 25, 2012 @12:08PM (#4157134)
Yes it's a radiative/convective coupling in the thin air gap.

Although the thermal conductivity of an air gap is normally low - which is why you have double glazed windows - it gets complicated if the gap is much less than the free path in the air

[ Parent | on HN ]