News for hackers. Stuff that matters.
Re:Why Your SSD (Probably) Sucks and What Your Database Can ... by justsomehnguy on Wednesday June 19, 2024 @03:48PM (#40731782)
Just use PCI-E converter for NVMe.

You wouldn't be able to boot from it, but it would work just fine.

Re:Why Your SSD (Probably) Sucks and What Your Database Can ... by timschmidt on Wednesday June 19, 2024 @03:55PM (#40731828)
A good suggestion, but it's a 1U server with both available PCIe slots populated between the external SAS controller and a dual 10gbE CNA. I boot from SATA SSDs currently. Could upgrade to enterprise SAS SSDs, but haven't noticed a need for my current uses. The boot drive is rarely touched, as most data terminates at the NetApp disk shelves, which have been a far more reliable way to connect unholy amounts of storage to a machine than any of the consumer direct attached storage options I've tried in the past. There's a mix of SSDs and spinning rust in the disk shelves - SSDs for web server stuff and spinning rust for low cost bulk storage.
Re:Why Your SSD (Probably) Sucks and What Your Database Can ... by justinclift on Wednesday June 19, 2024 @04:14PM (#40731964)
> with both available PCIe slots populated between the external SAS controller and a dual 10gbE CNA.

Interestingly, there do appear to be PCIe cards that do both external SAS and high speed networking in one card:

https://forums.servethehome.com/index.php?threads/unique-oem...

Looks like a bunch of mucking around is needed to get things setup, but seems like it works ok from that point onwards:

• https://www.ebay.com/itm/314150370285

Have been considering grabbing one to try in a HP Microserver Gen 8 that runs Proxmox. Not a lot of free time at the moment though. ;)

Re:Why Your SSD (Probably) Sucks and What Your Database Can ... by timschmidt on Wednesday June 19, 2024 @04:22PM (#40732040)
Neat! And affordable! Thanks! I will definitely look further into them. I got the 10gbE CNA from another university surplus find where a half dozen were being used as 16gb fibre channel adapters with SFP fibre modules. A little digging revealed that they could be switched to 10gbE CNA mode which is a lot more useful for my purposes. Enterprise gear is full of surprises :D

Only potential downside I see is the included pcie switch chip. It's dividing up 8gbps between three devices which could independently consume all of that bandwidth. Probably not a huge issue for my uses, but worth considering if you plan on transferring large amounts of data over network and storage simultaneously.

Re:Why Your SSD (Probably) Sucks and What Your Database Can ... by sgarland on Wednesday June 19, 2024 @07:05PM (#40733336)
You can, with caveats. You can use Clover [0] to bootstrap from a USB key (or anything else) that then hands off to an NVMe drive. Or you can mod your BIOS [1]. I have personally done this on a Supermicro 9th gen, and it works great. YMMV, especially with Dells or HPs which tend to be far more picky about everything.

[0]: https://github.com/CloverHackyColor/CloverBootloader

[1]: https://winraid.level1techs.com/t/howto-get-full-nvme-suppor...