News for hackers. Stuff that matters.
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by zer00eyz on Wednesday May 15, 2024 @11:32PM (#40374963)
> I can’t even use that much bandwidth.

I built an opnsense box (part of my proxmox cluster) and passed through a dual 10gbe nic. That whole PC was cheaper than any off the shelf routing solution I could find.

The rest of the network is going to take time... I suspect that im gonna end up with a few fiber runs in the house before all is said and done.

Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by i2shar on Thursday May 16, 2024 @12:49AM (#40375279)
What networking gear do you use inside your home? What router? Do they terminate an actual fiber connection (SFP+) to your home or you get 10GB Ethernet?
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by erwincoumans on Thursday May 16, 2024 @02:14AM (#40375698)
Sonic 10G rocks. I use Asus RT-AX89X router, with 2 10G ports, one input from Sonic, one output to 10G switches (Ubiquiti Networks UniFi Switch Flex XG 4-Port 10G).
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by kbenson on Thursday May 16, 2024 @01:38AM (#40375524)
You get a 10GbE port off the ONT.
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by lostlogin on Thursday May 16, 2024 @05:29AM (#40376565)
I’m not the op, but I can recommend the Unifi link aggregation switch and cheap Mellanox connectX3 cards. They are about $20 and are amazing. Fibre runs aren’t expensive but the transceivers are so copper DAC is good for short runs (as the connectors are built in).

Thunderbolt sfp adaptors also work.

Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by mlrtime on Thursday May 16, 2024 @08:49AM (#40377707)
You can thank early HFT and other early customers for those juicy cheap Mellanox cards. They used to be thousands when they first came out.
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by bcrl on Friday May 17, 2024 @05:32PM (#40394393)
Fibre transceivers are not expensive. You can get 2km 1310nm single mode 10G SFP+ modules for US$15 here: https://www.fibermall.com/sale-420055-sfp-10g-ir-1310nm-2km....
Re:Utah Locals Are Getting Cheap 10 Gbps Fiber Thanks to Loc... by zer00eyz on Thursday May 16, 2024 @09:16AM (#40378033)
Their ONT terminates to 10gb copper.

I bought a dual nic intel card off amazon (its from china) works a treat. There is an OK switch after that to get the network working...

It's going to take me. a minute to build out the rest of the network. Switches and cards are NOT cheap for 10gb. I'll probably end up running SFP+ fiber to a few places around the house and putting in a drop or 3 for some 10gbe love in other rooms.